Difficulty
Moderate
Steps
10
Time Required
25 - 30 minutes
Sections
5
- Battery
- 2 steps
- Memory Card
- 1 step
- SIM Card
- 1 step
- Keyboard
- 4 steps
- Back Case
- 2 steps
Flags
4
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Missed a Step
Oops! This guide is currently missing some important steps.
BackBlackBerry Bold 9900
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Place phone screen down.
- Use your finger to life upward on the battery case.
- Pull the cover away from the battery.
Place phone screen down.
Use your finger to life upward on the battery case.
Pull the cover away from the battery.
1024
Step 2
- Lift the edge of battery with the green stripe upward to remove battery.
Lift the edge of battery with the green stripe upward to remove battery.
Step 3
Mini-SIM removal
- The Mini-SIM card is located inside the red rectangle.
- To remove the Mini-SIM Card, push and slide the card inward towards the top of the phone. It will be ejected.
The Mini-SIM card is located inside the red rectangle.
To remove the Mini-SIM Card, push and slide the card inward towards the top of the phone. It will be ejected.
Step 4
MicroSD card
- The MicroSD card is located where the red rectangle is shown.
- To remove MicroSD card, push the card inward towards the top of the phone then release. The MicroSD card will be ejected.
The MicroSD card is located where the red rectangle is shown.
To remove MicroSD card, push the card inward towards the top of the phone then release. The MicroSD card will be ejected.
Step 5
Keyboard
- Lift the bezel at the bottom of the phone up and peel it away from the phone.
Lift the bezel at the bottom of the phone up and peel it away from the phone.
Step 6
- Remove the two exposed screws using the T5 Torx screwdriver.
Remove the two exposed screws using the T5 Torx screwdriver.
Step 7
- Now lever the keyboard up using the screwdriver in the indicated hole.
Now lever the keyboard up using the screwdriver in the indicated hole.
Step 8
- The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard.
The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard.
Step 9
Back Case
- Using the T5 Torx Screwdriver, remove the four torx screws that are located on the bottom half of the device
Using the T5 Torx Screwdriver, remove the four torx screws that are located on the bottom half of the device
Step 10
- Now, carefully and gently using your fingers, lift and remove the assembly from the back case.
Now, carefully and gently using your fingers, lift and remove the assembly from the back case.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Sowmika
Member since: 01/30/2018
253 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
Baylor, Team S1-G4, Johnson Spring 2018
Member of Baylor, Team S1-G4, Johnson Spring 2018
BU-JOHNSON-S18S1G4
3 Members
6 Guides authored
