Difficulty

Moderate

Steps

14

Time Required

                          30 - 40 minutes

Sections

7

  • Battery
  • 2 steps
  • Memory Card
  • 1 step
  • SIM Card
  • 1 step
  • Keyboard
  • 4 steps
  • Back Case
  • 2 steps
  • Power/Volume Button
  • 2 steps
  • Screen
  • 2 steps

Flags

4

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackBlackBerry Bold 9900

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Place phone screen down.
  • Use your finger to life upward on the battery case.
  • Pull the cover away from the battery.

Place phone screen down.

Use your finger to life upward on the battery case.

Pull the cover away from the battery.

1024

Step 2

  • Lift the edge of battery with the green stripe upward to remove battery.

Lift the edge of battery with the green stripe upward to remove battery.

Step 3

              Mini-SIM removal
  • The Mini-SIM card is located inside the red rectangle.
  • To remove the Mini-SIM Card, push and slide the card inward towards the top of the phone. It will be ejected.

The Mini-SIM card is located inside the red rectangle.

To remove the Mini-SIM Card, push and slide the card inward towards the top of the phone. It will be ejected.

Step 4

              MicroSD card
  • The MicroSD card is located where the red rectangle is shown.
  • To remove MicroSD card, push the card inward towards the top of the phone then release. The MicroSD card will be ejected.

The MicroSD card is located where the red rectangle is shown.

To remove MicroSD card, push the card inward towards the top of the phone then release. The MicroSD card will be ejected.

Step 5

              Keyboard
  • Lift the bezel at the bottom of the phone up and peel it away from the phone.

Lift the bezel at the bottom of the phone up and peel it away from the phone.

Step 6

  • Remove the two exposed screws using the T5 Torx screwdriver.

Remove the two exposed screws using the T5 Torx screwdriver.

Step 7

  • Now lever the keyboard up using the screwdriver in the indicated hole.

Now lever the keyboard up using the screwdriver in the indicated hole.

Step 8

  • The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard.

The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard.

Step 9

              Back Case
  • Using the T5 Torx Screwdriver, remove the four torx screws that are located on the bottom half of the device

Using the T5 Torx Screwdriver, remove the four torx screws that are located on the bottom half of the device

Step 10

  • Now, carefully and gently using your fingers, lift and remove the assembly from the back case.

Now, carefully and gently using your fingers, lift and remove the assembly from the back case.

Step 11

              Power/Volume Button
  • Use the black nylon spudger to pop the press fit connector up from the lower left corner of the motherboard.

Use the black nylon spudger to pop the press fit connector up from the lower left corner of the motherboard.

Step 12

  • Lift the midframe, which contains the power/volume buttons, off of the motherboard and screen.

Lift the midframe, which contains the power/volume buttons, off of the motherboard and screen.

Step 13

              Screen
  • Using a spudger, gently remove the display cable out from the motherboard.
  • When it seems it has become loose enough, remove it by pinching the ribbon firmly with your fingers and gently sliding it the rest of the way out.

Using a spudger, gently remove the display cable out from the motherboard.

When it seems it has become loose enough, remove it by pinching the ribbon firmly with your fingers and gently sliding it the rest of the way out.

Step 14

  • Remove the screen from the motherboard.

Remove the screen from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Austin Blakely

Member since: 03/11/2019

16,291 Reputation

                                      52 Guides authored                  



                       Badges:
                       37







                                                        +34 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored