Blackberry Bold 9900 Trackpad Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          5 - 10 minutes            

Sections

4

• Battery
• 2 steps
• SIM Card
• 1 step
• Keyboard
• 4 steps
• Trackpad
• 2 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

• BackBlackBerry Bold 9900

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Place phone screen down.
• Use your finger to life upward on the battery case.
• Pull the cover away from the battery.

Place phone screen down.

Use your finger to life upward on the battery case.

Pull the cover away from the battery.

1024

Step 2

• Lift the edge of battery with the green stripe upward to remove battery.

Lift the edge of battery with the green stripe upward to remove battery.

Step 3

              MicroSD card               

• The MicroSD card is located where the red rectangle is shown.
• To remove MicroSD card, push the card inward towards the top of the phone then release. The MicroSD card will be ejected.

The MicroSD card is located where the red rectangle is shown.

To remove MicroSD card, push the card inward towards the top of the phone then release. The MicroSD card will be ejected.

Step 4

              Keyboard               

• Lift the bezel at the bottom of the phone up and peel it away from the phone.

Lift the bezel at the bottom of the phone up and peel it away from the phone.

Step 5

• Remove the two exposed screws using the T5 Torx screwdriver.

Remove the two exposed screws using the T5 Torx screwdriver.

Step 6

• Now lever the keyboard up using the screwdriver in the indicated hole.

Now lever the keyboard up using the screwdriver in the indicated hole.

Step 7

• The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard.

The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard.

Step 8

              Trackpad               

• Push into the trackpad. This will release the trackpad supporting piece.

Push into the trackpad. This will release the trackpad supporting piece.

Step 9

• The trackpad is attached via ribbon cable. Pull this cable up in order to release the trackpad.

The trackpad is attached via ribbon cable. Pull this cable up in order to release the trackpad.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Chris Velasquez                     

Member since: 01/30/2018

214 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Baylor, Team S1-G4, Johnson Spring 2018                        

                                                  Member of Baylor, Team S1-G4, Johnson Spring 2018 



                    BU-JOHNSON-S18S1G4                     


                                            3 Members                     


                                            6 Guides authored