Difficulty
Moderate
Steps
12
Time Required
10 - 15 minutes
Sections
5
- Battery
- 2 steps
- Lens
- 4 steps
- Keyboard
- 1 step
- Screen Housing
- 3 steps
- LCD Screen
- 2 steps
Flags
2
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackBlackBerry Curve 8310
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Press down on the battery release button and slide the back cover up with your thumb.
Press down on the battery release button and slide the back cover up with your thumb.
1024
Step 2
- Pry from the top of the battery to pull it out.
Pry from the top of the battery to pull it out.
Step 3
Lens
- Slide the metal sim card cover to the unlock position.
- Remove the sim card.
- The arrows on the sim card enclosure indicate the lock and unlock positions.
Slide the metal sim card cover to the unlock position.
Remove the sim card.
The arrows on the sim card enclosure indicate the lock and unlock positions.
Step 4
- Remove the two T5 Torx screws circled at the top of the phone.
- The T5 Torx screws may be covered by a white sticker.
Remove the two T5 Torx screws circled at the top of the phone.
The T5 Torx screws may be covered by a white sticker.
Step 5
- Remove the red cover at the bottom of the phone.
- You may have to work a spudger underneath to release the plastic clips.
Remove the red cover at the bottom of the phone.
You may have to work a spudger underneath to release the plastic clips.
Step 6
- Be careful not to damage the front cover’s plastic clips while trying to separate it from the phone.
- Use a spudger to pry the front cover away from the side panels.
- Work the spudger around the entire phone until the front cover is free.
Be careful not to damage the front cover’s plastic clips while trying to separate it from the phone.
Use a spudger to pry the front cover away from the side panels.
Work the spudger around the entire phone until the front cover is free.
Step 7
Keyboard
- Remove the keyboard.
Remove the keyboard.
Step 8
Screen Housing
- Remove the four T6 Torx screws located on the corners of the keyboard frame.
Remove the four T6 Torx screws located on the corners of the keyboard frame.
Step 9
- Now remove the left and right side panels.
Now remove the left and right side panels.
Step 10
- Remove the keyboard frame.
- Be sure to unhook the screen housing from the motherboard before continuing. Refer to the square indicated in the second picture.
- Now remove the screen housing.
Remove the keyboard frame.
Be sure to unhook the screen housing from the motherboard before continuing. Refer to the square indicated in the second picture.
Now remove the screen housing.
Step 11
LCD Screen
- Unplug the ribbon cable from the board.
- The ribbon cable is located at the top left of the phone above the screen.
Unplug the ribbon cable from the board.
The ribbon cable is located at the top left of the phone above the screen.
Step 12
- Insert tool between LCD screen and board.
- Pry LCD screen from board.
Insert tool between LCD screen and board.
Pry LCD screen from board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 5 other contributors
Mandy Chan
Member since: 01/20/2012
91 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 10-32, Amido Winter 2012
Member of Cal Poly, Team 10-32, Amido Winter 2012
CPSU-AMIDO-W12S10G32
4 Members
8 Guides authored
