Difficulty
Moderate
Steps
6
Time Required
10 minutes
Sections
2
- Front Panel
- 5 steps
- Keyboard
- 1 step
Flags
0
BackBlackberry Curve 8320
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
- Remove the batteryRemove the front panelReplace the keyboard
What you need
Step 1
Front Panel
- Use a plastic opening tool to gently pry the bottom cover loose.
- Do not use excessive force at risk of damaging the antenna, which is under this casing.
- Pull the cover from the front of the phone after the back is loose.
Use a plastic opening tool to gently pry the bottom cover loose.
Do not use excessive force at risk of damaging the antenna, which is under this casing.
Pull the cover from the front of the phone after the back is loose.
1024
Step 2
- Remove the two top screws with a T5 Torx screwdriver.
- The screws are 8mm long.
Remove the two top screws with a T5 Torx screwdriver.
The screws are 8mm long.
Step 3
- Gently pry off the side casings from the top.
- The side casings cannot be fully removed yet because they are screwed on at the bottom.
- You will not need to remove the sides on the bottom.
Gently pry off the side casings from the top.
The side casings cannot be fully removed yet because they are screwed on at the bottom.
You will not need to remove the sides on the bottom.
Step 4
- Use a plastic opening tool to detach the securing clips holding the the front panel in place.
- There are six securing clips total.
Use a plastic opening tool to detach the securing clips holding the the front panel in place.
There are six securing clips total.
Step 5
- Carefully remove the front panel.
- You may need to apply some force in removing because the front panel is attached to the rest of the device with adhesive.
Carefully remove the front panel.
You may need to apply some force in removing because the front panel is attached to the rest of the device with adhesive.
Step 6
Keyboard
- Remove the keyboard.
- Be careful not to bend or fold the keyboard, as it can break easily.
Remove the keyboard.
Be careful not to bend or fold the keyboard, as it can break easily.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Yegor Pomortsev
Member since: 10/12/2011
123 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 3-6, Regan Fall 2011
Member of Cal Poly, Team 3-6, Regan Fall 2011
CPSU-REGAN-F11S3G6
5 Members
9 Guides authored
