Difficulty
Easy
Steps
9
Time Required
3 minutes
Sections
3
- Battery
- 3 steps
- Back Housing
- 4 steps
- Front Housing
- 2 steps
Flags
0
BackBlackberry RIM 7250
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Push the release button down and away from the device.
- Slide the cover off toward the bottom of the device, revealing the battery compartment.
Push the release button down and away from the device.
Slide the cover off toward the bottom of the device, revealing the battery compartment.
1024
Step 2
- Place your finger in the groove next to the battery.
- Lift your finger up to eject the battery from the battery compartment.
Place your finger in the groove next to the battery.
Lift your finger up to eject the battery from the battery compartment.
Step 3
- Remove the battery from the compartment.
Remove the battery from the compartment.
Step 4
Back Housing
- Remove the four 10.7 mm Torx T6 screws.
Remove the four 10.7 mm Torx T6 screws.
Step 5
- Remove the two 5 mm Torx T6 screws.
Remove the two 5 mm Torx T6 screws.
Step 6
- Hold the phone with one hand, with the bottom facing toward you.
- For both clips, insert the plastic opening tool and push away from you.
- You will hear a clicking sound for each clip that is released.
Hold the phone with one hand, with the bottom facing toward you.
For both clips, insert the plastic opening tool and push away from you.
You will hear a clicking sound for each clip that is released.
Step 7
- Grab the back housing from the bottom and lift the housing away from you.
Grab the back housing from the bottom and lift the housing away from you.
Step 8
Front Housing
- Place your thumb on the bottom rectangle and your index finger on the top rectangle.
- Squeeze your fingers together to release the internals from the front housing.
Place your thumb on the bottom rectangle and your index finger on the top rectangle.
Squeeze your fingers together to release the internals from the front housing.
Step 9
- Pull the two pieces apart to separate the front housing from the internals.
Pull the two pieces apart to separate the front housing from the internals.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Noah Eckert
Member since: 11/05/2018
519 Reputation
5 Guides authored
Badges:
4
+1 more badge
Team
IUPUI, Team S2-G4, Baechle Fall 2018
Member of IUPUI, Team S2-G4, Baechle Fall 2018
IUPUI-BAECHLE-F18S2G4
3 Members
5 Guides authored
