Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

  • Replacing rear camera
  • 5 steps

Flags

2

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackBlackberry Torch 9800

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Replacing rear camera
  • Remove the back cover and the battery.
  • Remove the four exposed screws using a T7 screwdriver.
  • Warning: Removing the top right screw (with the blue cover) will void the warranty.

Remove the back cover and the battery.

Remove the four exposed screws using a T7 screwdriver.

Warning: Removing the top right screw (with the blue cover) will void the warranty.

1024

Step 2

  • Remove the side trim using the plastic opening tool.
  • When loose, push the top backwards and the bottom forwards to remove.

Remove the side trim using the plastic opening tool.

When loose, push the top backwards and the bottom forwards to remove.

Step 3

  • Two new screws have been exposed near the top of the back.
  • Remove the two screws using the T7 screwdriver.
  • Remove the back panel using the plastic opening tool.

Two new screws have been exposed near the top of the back.

Remove the two screws using the T7 screwdriver.

Remove the back panel using the plastic opening tool.

Step 4

  • Carefully use flathead screwdriver to free camera sensor.
  • Wiggle on the right and left sides, not the top and bottom sides.

Carefully use flathead screwdriver to free camera sensor.

Wiggle on the right and left sides, not the top and bottom sides.

Step 5

  • To install the new camera sensor, place in slot. Reassemble phone by doing steps 1-3 in reverse order.

To install the new camera sensor, place in slot. Reassemble phone by doing steps 1-3 in reverse order.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    0delete

Member since: 02/16/2016

165 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Ohio State, Team 1-5, Garvin Spring 2016                        

                                                  Member of Ohio State, Team 1-5, Garvin Spring 2016 



                    OSU-GARVIN-S16S1G5                     


                                            3 Members                     


                                            3 Guides authored