Blackberry Z20 Leap Lcd Digitizer Replacement Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          8 minutes            

Sections

1

• LCD/Digitizer Replacement
• 4 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackBlackBerry Leap

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Blackberry Leap Screen Replacement               

• Blackberry Z20 Leap (STR200-2) with a bad LCD. The first question is…Where are the screws?

Blackberry Z20 Leap (STR200-2) with a bad LCD. The first question is…Where are the screws?

1024

Step 2

              remove screws               

• The screws are behind the sticker beside the camera. Heat the sticker and use a knife to pry under the sticker to remove it. There are 2 screws which you need a T6 torx screwdriver to remove.

The screws are behind the sticker beside the camera. Heat the sticker and use a knife to pry under the sticker to remove it. There are 2 screws which you need a T6 torx screwdriver to remove.

Step 3

              unseat screen assembly               

• Push up on screen with thumbs once the screws have been removed. The screen assembly will now come away from the chassis. Be careful there is still some ribbon cables connected to the screen assembly.

Push up on screen with thumbs once the screws have been removed. The screen assembly will now come away from the chassis. Be careful there is still some ribbon cables connected to the screen assembly.

Step 4

              disconnect connectors               

• In the top there is a connector where you have to lift the black part of the connector to remove the ribbon. I used tweezers to lift the connector and to remove the ribbon cable
• Once the top ribbon is removed there is another cable connected in the middle. The phone will open up more to give you access. You will need to lift the black part of the connector to remove the ribbon. Again, I used tweezers. The screen assembly should now come away from the chassis

In the top there is a connector where you have to lift the black part of the connector to remove the ribbon. I used tweezers to lift the connector and to remove the ribbon cable

Once the top ribbon is removed there is another cable connected in the middle. The phone will open up more to give you access. You will need to lift the black part of the connector to remove the ribbon. Again, I used tweezers. The screen assembly should now come away from the chassis

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      9 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Amanda Baxter                     

Member since: 02/08/2016

217 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Xpider - Apr 18, 2016

Reply

Excellent Guide Amanda! thanks for the great work!

Sani Shik - Aug 4, 2016

Reply

How to remove lcd from the frame (bezel)

zoe smith - Nov 10, 2016

Can you advise how this is done please…removing the lcd from the frame

Dave - Oct 30, 2016

Reply

I bought a T6 torx screwdriver but it is too big for my Leap (STR200-1). Any idea what size torx I need? I’m guessing T5 but…

Dave - Nov 2, 2016

Reply

Yep bought a T5 torx screwdriver and that did it