Blu Dash 5 0 Dual Sim Back Camera Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          15 minutes            

Sections

1

• Back Camera
• 5 steps

Flags

0

• BackBlu Dash 5.0 Dual SIM

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Camera               

• Make sure device is disconnected and turned off.
• Locate the groove on the bottom left corner of the back of the phone.
• Insert the plastic opening tool into the groove and pry it open.
• Lift the back cover of the phone using your hands.

Make sure device is disconnected and turned off.

Locate the groove on the bottom left corner of the back of the phone.

Insert the plastic opening tool into the groove and pry it open.

Lift the back cover of the phone using your hands.

1024

Step 2

• Pry the battery out using the plastic opening tool.

Pry the battery out using the plastic opening tool.

Step 3

• Remove the 12 screws on the back panel using a J000 screwdriver.
• Red circles correspond to the screw holes holding 3.5 mm length Phillips screws.
• Orange circles correspond to the screw holes holding 2.5 mm length Phillips screws.

Remove the 12 screws on the back panel using a J000 screwdriver.

Red circles correspond to the screw holes holding 3.5 mm length Phillips screws.

Orange circles correspond to the screw holes holding 2.5 mm length Phillips screws.

Step 4

• Peel off the back panel with your hand.
• Remove the back panel slowly to avoid breaking it.

Peel off the back panel with your hand.

Remove the back panel slowly to avoid breaking it.

Step 5

• Flip up the ZIF flap using the spudger.
• Gently remove the ribbon cable with tweezers.
• The ribbon cable is sensitve and needs to be removed carefully to insure its integrity.
• Remove the back camera using tweezers.

Flip up the ZIF flap using the spudger.

Gently remove the ribbon cable with tweezers.

The ribbon cable is sensitve and needs to be removed carefully to insure its integrity.

Remove the back camera using tweezers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Mukish Kumar Munyady                     

Member since: 01/30/2017

201 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       IUPUI, Team 1-1, Baechle Spring 2017                        

                                                  Member of IUPUI, Team 1-1, Baechle Spring 2017 



                    IUPUI-BAECHLE-S17S1G1                     


                                            4 Members                     


                                            3 Guides authored