Difficulty

Difficult

Steps

7

Time Required

                          20 - 30 minutes

Sections

1

  • Headphone Jack
  • 7 steps

Flags

3

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackBLU Dash Music 4.0

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Remove the Back Cover
  • Use the plastic opening tool or your fingernail to pry off the back cover.

Use the plastic opening tool or your fingernail to pry off the back cover.

1024

Step 2

              Remove the Battery
  • Use the plastic opening tool or your fingernail to pry off the battery from the top right corner.

Use the plastic opening tool or your fingernail to pry off the battery from the top right corner.

Step 3

              Remove the Screws
  • Use a screwdriver to remove each of the four screws.

Use a screwdriver to remove each of the four screws.

Step 4

              Remove the Inner Cover
  • Take the plastic opening tool and insert it in the crease between the front screen and the inner back cover.
  • Slide the plastic opening tool along the edge of the phone to pry the two covers apart.

Take the plastic opening tool and insert it in the crease between the front screen and the inner back cover.

Slide the plastic opening tool along the edge of the phone to pry the two covers apart.

Step 5

              Remove the Black Pad
  • Insert the plastic opening tool between the black pad and the circuit board. Then gently pry off the black pad.
  • This will make the connections of the charging port more accessible.

Insert the plastic opening tool between the black pad and the circuit board. Then gently pry off the black pad.

This will make the connections of the charging port more accessible.

Step 6

              Remove the Solder Connections
  • Using a soldering iron and a pair of pliers, melt the soldering connections around the headphone jack.
  • Quickly pull off the current headphone jack while the soldering connections are still soft.

Using a soldering iron and a pair of pliers, melt the soldering connections around the headphone jack.

Quickly pull off the current headphone jack while the soldering connections are still soft.

Step 7

              Mount the New Headphone Jack
  • Mount the new headphone jack such that the prongs of the headphone jack line up with the soldering connections.
  • Using a soldering iron, solder the connections in place.

Mount the new headphone jack such that the prongs of the headphone jack line up with the soldering connections.

Using a soldering iron, solder the connections in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Lioma Terrero Soto

Member since: 10/16/2014

525 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       UMass Dartmouth, Team 6-8, Vijaybhaskar Fall 2014                        

                                                  Member of UMass Dartmouth, Team 6-8, Vijaybhaskar Fall 2014 



                    UMASSD-VIJAYBHASKAR-F14S6G8                     


                                            4 Members                     


                                            5 Guides authored