Difficulty

Moderate

Steps

8

Time Required

                          10 - 15 minutes            

Sections

2

  • Battery
  • 3 steps
  • Motherboard
  • 5 steps

Flags

0

  • BackBLU Energy X

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Remove the back case using plastic opening tool.

Remove the back case using plastic opening tool.

1024

Step 2

  • Remove the seven 4mm Phillips #000 screws.
  • Remove the top plate.

Remove the seven 4mm Phillips #000 screws.

Remove the top plate.

Step 3

  • Detach the battery from the mother board using a plastic opening tool.
  • Use a plastic spudger to remove battery.

Detach the battery from the mother board using a plastic opening tool.

Use a plastic spudger to remove battery.

Step 4

              Motherboard               
  • Use the flat end of a spudger to flip up the black retaining flap on the ZIF connector.

Use the flat end of a spudger to flip up the black retaining flap on the ZIF connector.

Step 5

  • Gently pull the ribbon cable free of the ZIF connector.

Gently pull the ribbon cable free of the ZIF connector.

Step 6

  • Gently peel up the antenna.
  • This is secured with some light adhesive, so some force may be required.

Gently peel up the antenna.

This is secured with some light adhesive, so some force may be required.

Step 7

  • Gently rotate the motherboard up so that the front-facing camera is pointed towards you.
  • Use the pointed end of a spudger to disconnect the antenna cable and the ribbon cable.

Gently rotate the motherboard up so that the front-facing camera is pointed towards you.

Use the pointed end of a spudger to disconnect the antenna cable and the ribbon cable.

Step 8

  • Lift the motherboard up and out of the device.

Lift the motherboard up and out of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                    Geoff Wacker                     

Member since: 09/30/2013

87,546 Reputation

                                      89 Guides authored                  



                       Badges:
                       44







                                                        +41 more badges