Difficulty
Moderate
Steps
11
Time Required
Suggest a time??
Sections
2
- Battery
- 8 steps
- Camera
- 3 steps
Flags
0
BackBLU Energy X Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Before disassembling your BLU Energy X Plus, make sure it is powered off.
- Flip your device to the left side facing up and take out the SD card tray using the SIM card eject tool. You will insert the tool in at an angle and lift the tray up.
Before disassembling your BLU Energy X Plus, make sure it is powered off.
Flip your device to the left side facing up and take out the SD card tray using the SIM card eject tool. You will insert the tool in at an angle and lift the tray up.
1024
Step 2
- Flip your device to the right side facing up and use the SIM card eject tool to remove the SIM card by pushing the tool in the hole. You will feel a button click and the tray should slide out 2mm. You will then use your fingers to pull the tray out.
Flip your device to the right side facing up and use the SIM card eject tool to remove the SIM card by pushing the tool in the hole. You will feel a button click and the tray should slide out 2mm. You will then use your fingers to pull the tray out.
Step 3
- Flip your device over so your back cover is facing up.
Flip your device over so your back cover is facing up.
Step 4
- Take the blue plastic opening tool and insert it in-between the back of the phone and the chrome trim. Go all the way around the device slowly to take the back cover off.
Take the blue plastic opening tool and insert it in-between the back of the phone and the chrome trim. Go all the way around the device slowly to take the back cover off.
Step 5
- Remove the six silver screws from the cover plate, and one black screw from the top.
- Use the screwdriver head J000 to remove all the screws.
- Six silver screws, all 1.5mm in length.
- One black screw, 1mm in length.
Remove the six silver screws from the cover plate, and one black screw from the top.
Use the screwdriver head J000 to remove all the screws.
Six silver screws, all 1.5mm in length.
One black screw, 1mm in length.
Step 6
- After all the screws are out, lift the protective metal cover off of the phone. Lift from the bottom of the cover.
After all the screws are out, lift the protective metal cover off of the phone. Lift from the bottom of the cover.
Step 7
- Use the small blue plastic opening tool to lift the contact attached to the battery from the motherboard of the phone.
Use the small blue plastic opening tool to lift the contact attached to the battery from the motherboard of the phone.
Step 8
- Use the small blue plastic opening tool to lift the battery from the bottom with little force because the battery will be glued in.
- Then, use your hand to remove the battery completely.
Use the small blue plastic opening tool to lift the battery from the bottom with little force because the battery will be glued in.
Then, use your hand to remove the battery completely.
Step 9
Camera
- Disconnect the contact patch using the small blue plastic opening tool.
Disconnect the contact patch using the small blue plastic opening tool.
Step 10
- Loosen the camera from the glue using the small blue plastic opening tool.
Loosen the camera from the glue using the small blue plastic opening tool.
Step 11
- After loosening the glue from the bottom of the camera, lift the camera out of the phone.
After loosening the glue from the bottom of the camera, lift the camera out of the phone.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
woodjake94
Member since: 02/09/2016
638 Reputation
5 Guides authored
Badges:
13
+10 more badges
Team
USF Tampa, Team 2-121, Cagle Spring 2016
Member of USF Tampa, Team 2-121, Cagle Spring 2016
USFT-CAGLE-S16S2G121
4 Members
5 Guides authored
