Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

3

  • Battery
  • 4 steps
  • Plastic Plate
  • 2 steps
  • Camera
  • 1 step

Flags

1

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackBlu Grand M

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the two plastic plates with a plastic opening tool.

Remove the two plastic plates with a plastic opening tool.

1024

Step 2

  • Using a Phillips #000 screwdriver, remove the 3mm screws. Be sure to do this for the top and bottom of the phone.

Using a Phillips #000 screwdriver, remove the 3mm screws. Be sure to do this for the top and bottom of the phone.

Step 3

  • Remove SIM card tray with paperclip or SIM card tray removal tool.
  • Push down on the phone beside the camera and up on the backplate with your thumbs to remove the back plate. Remove adhesive if necessary.

Remove SIM card tray with paperclip or SIM card tray removal tool.

Push down on the phone beside the camera and up on the backplate with your thumbs to remove the back plate. Remove adhesive if necessary.

Step 4

  • There is a patch of adhesive underneath the battery, which can make it difficult to remove.
  • Place the plastic opening tool in the highlighted indent, and push up on the battery to remove it.

There is a patch of adhesive underneath the battery, which can make it difficult to remove.

Place the plastic opening tool in the highlighted indent, and push up on the battery to remove it.

Step 5

              Plastic Plate
  • Remove the yellow plastic tape using a pair of tweezers.

Remove the yellow plastic tape using a pair of tweezers.

Step 6

  • Use a Phillips #000 screwdriver to remove two black 4.0mm screws.
  • Use a Phillips #000 screwdriver to remove 2 silver 4.0mm screws
  • Remove the plastic cover along the top by tugging on it on the corner as shown.

Use a Phillips #000 screwdriver to remove two black 4.0mm screws.

Use a Phillips #000 screwdriver to remove 2 silver 4.0mm screws

Remove the plastic cover along the top by tugging on it on the corner as shown.

Step 7

              Camera
  • Use the plastic opening tool to lift the camera out.

Use the plastic opening tool to lift the camera out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                    Kristen Gismondi

Member since: 11/12/2014

69,395 Reputation

                                      176 Guides authored                  



                       Badges:
                       44





                                                        +41 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored