Blu Grand M Display Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          3 - 6 minutes            

Sections

1

• Display
• 3 steps

Flags

0

• BackBlu Grand M

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Display               

• Trace the outer black edge of the phone screen in a continuous circle with a hairdryer or heat gun to melt the adhesive.
• Melting the adhesive can take between 2-3 minutes.

Trace the outer black edge of the phone screen in a continuous circle with a hairdryer or heat gun to melt the adhesive.

Melting the adhesive can take between 2-3 minutes.

1024

Step 2

• Insert an opening pick between the screen and the raised black plastic frame.
• The black plastic frame is located inside and above the phone’s silvery outer metal frame.
• Insert the flat blade of a nylon halberd spudger between the screen and the black plastic frame.
• Pull the spudger blade through the adhesive around the circumference of the screen.

Insert an opening pick between the screen and the raised black plastic frame.

The black plastic frame is located inside and above the phone’s silvery outer metal frame.

Insert the flat blade of a nylon halberd spudger between the screen and the black plastic frame.

Pull the spudger blade through the adhesive around the circumference of the screen.

Step 3

• Apply the suction cup to the phone screen, pressing lightly on the suction cup to remove air and form a tight seal.
• The adhesive may have cooled from the time since step 1 and rebonded to the phone screen. Reheat the adhesive if necessary to return to a liquid state.
• Pull on the handle to lift the screen free from the device.

Apply the suction cup to the phone screen, pressing lightly on the suction cup to remove air and form a tight seal.

The adhesive may have cooled from the time since step 1 and rebonded to the phone screen. Reheat the adhesive if necessary to return to a liquid state.

Pull on the handle to lift the screen free from the device.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Liam Rollins                     

Member since: 11/04/2019

253 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       Idaho State University, Team S1-G2, Watkins Fall 2019                        

                                                  Member of Idaho State University, Team S1-G2, Watkins Fall 2019 



                    ISU-WATKINS-F19S1G2                     


                                            4 Members                     


                                            2 Guides authored