Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

2

  • Battery
  • 4 steps
  • Speaker
  • 2 steps

Flags

1

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackBlu Grand M

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the two plastic plates with a plastic opening tool.

Remove the two plastic plates with a plastic opening tool.

1024

Step 2

  • Using a Phillips #000 screwdriver, remove the 3mm screws. Be sure to do this for the top and bottom of the phone.

Using a Phillips #000 screwdriver, remove the 3mm screws. Be sure to do this for the top and bottom of the phone.

Step 3

  • Remove SIM card tray with paperclip or SIM card tray removal tool.
  • Push down on the phone beside the camera and up on the backplate with your thumbs to remove the back plate. Remove adhesive if necessary.

Remove SIM card tray with paperclip or SIM card tray removal tool.

Push down on the phone beside the camera and up on the backplate with your thumbs to remove the back plate. Remove adhesive if necessary.

Step 4

  • There is a patch of adhesive underneath the battery, which can make it difficult to remove.
  • Place the plastic opening tool in the highlighted indent, and push up on the battery to remove it.

There is a patch of adhesive underneath the battery, which can make it difficult to remove.

Place the plastic opening tool in the highlighted indent, and push up on the battery to remove it.

Step 5

              Speaker
  • Remove the exterior cover with a Torx 2 screwdriver, to remove two 3.0mm screws.
  • Remove the 4.0mm screw with a Phillips #000 screwdriver.
  • Using the blue plastic opening tool, remove the exterior cover.

Remove the exterior cover with a Torx 2 screwdriver, to remove two 3.0mm screws.

Remove the 4.0mm screw with a Phillips #000 screwdriver.

Using the blue plastic opening tool, remove the exterior cover.

Step 6

  • Use a Phillips #000 screwdriver to remove each of the four 1.5mm screws.
  • Use a Phillips #000 screwdriver to remove each of the three 3.0mm screws.
  • Use the plastic opening tool to remove the speaker.

Use a Phillips #000 screwdriver to remove each of the four 1.5mm screws.

Use a Phillips #000 screwdriver to remove each of the three 3.0mm screws.

Use the plastic opening tool to remove the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Cameron Retzlaff

Member since: 09/17/2018

608 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Washington State, Team S9-G2, Hope Fall 2018                        

                                                  Member of Washington State, Team S9-G2, Hope Fall 2018 



                    WSU-HOPE-F18S9G2                     


                                            3 Members                     


                                            5 Guides authored