Blu Grand M2 Charging Port Assembly Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          10 - 20 minutes

Sections

Charging Port Assembly
3 steps

Flags

BackBLU Grand M2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

In order to follow this guide, you will need to solder. Check out the How to Solder and Desolder Connections guide before you start if you are unfamiliar or need a refresher. Also be sure to power off the phone before beginning your repair.

What you need

Step 1

              Charging Port Assembly

Remove the screws with the T2 Torx screwdriver.
Place screws off to the side.

Remove the screws with the T2 Torx screwdriver.

Place screws off to the side.

1024

Step 2

Once the Torx screws have been removed, use a pry tool and a suction tool to remove the back plate.
Using the T2 Torx screwdriver, remove the six Torx screws on the motherboard.
Make sure to disconnect all other connections from the camera.

Once the Torx screws have been removed, use a pry tool and a suction tool to remove the back plate.

Using the T2 Torx screwdriver, remove the six Torx screws on the motherboard.

Make sure to disconnect all other connections from the camera.

Step 3

Carefully pry the motherboard assembly from the phone.
The charging port assembly is soldered to the motherboard piece. Remove the port with a soldering iron.
Once you have removed the faulty port, replace it with the new port. Attach the new charging port with the soldering iron.
After installing the new port, repeat the steps in reverse order to reassemble the phone.
How to Solder and Desolder Connections

Carefully pry the motherboard assembly from the phone.

The charging port assembly is soldered to the motherboard piece. Remove the port with a soldering iron.

Once you have removed the faulty port, replace it with the new port. Attach the new charging port with the soldering iron.

After installing the new port, repeat the steps in reverse order to reassemble the phone.

How to Solder and Desolder Connections

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 7 other contributors

                    Richard Hills

Member since: 09/10/2018

150 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Gateway, Team S1-G3, Luster Fall 2018                        

                                                  Member of Gateway, Team S1-G3, Luster Fall 2018 



                    GCC-LUSTER-F18S1G3                     


                                            4 Members                     


                                            4 Guides authored

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team