Blu Grand M2 Rear Camera Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          3 - 6 minutes            

Sections

1

• Rear Camera
• 5 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

• BackBLU Grand M2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

The process is of a moderate difficulty and requires five tools for completion.

What you need

Step 1

              Confirm the Device               

• Check the front panel and confirm you are repairing the BLU Grand M2 (figure 1)
• Turn the device over and identify the the rear-facing camera (figure 2) This is what you will be replacing

Check the front panel and confirm you are repairing the BLU Grand M2 (figure 1)

Turn the device over and identify the the rear-facing camera (figure 2) This is what you will be replacing

1024

Step 2

• Locate the two torx screws at the bottom of the phone and remove them using the T2 Torx Screwdriver.

Locate the two torx screws at the bottom of the phone and remove them using the T2 Torx Screwdriver.

Step 3

• Use the suction and pry tools to carefully remove the black plate.
• Be cautious!! Do not damage the phone display or inside components while using pry and suction tools.

Use the suction and pry tools to carefully remove the black plate.

Be cautious!! Do not damage the phone display or inside components while using pry and suction tools.

Step 4

• Identify the back-panel camera in the left -hand corner of the open device. (Figure 1)

Identify the back-panel camera in the left -hand corner of the open device. (Figure 1)

Step 5

• Use the Plastic Pry Tool to carefully to lift the tab on the right-hand side of the connector.
• Carefully remove camera from housing using a pair of tweezers.

Use the Plastic Pry Tool to carefully to lift the tab on the right-hand side of the connector.

Carefully remove camera from housing using a pair of tweezers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Alan Rodriguez                     

Member since: 09/10/2018

311 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Gateway, Team S1-G3, Luster Fall 2018                        

                                                  Member of Gateway, Team S1-G3, Luster Fall 2018 



                    GCC-LUSTER-F18S1G3                     


                                            4 Members                     


                                            4 Guides authored