Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
1
- Loudspeaker
- 5 steps
Flags
2
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
Better Introduction
Improve this guide by completing or revising its introduction.
BackBLUE Life One L120
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Open the back panel
- Remove the back cover by lifting at the notch towards the bottom of the phone. Use your fingernail to pry up.
Remove the back cover by lifting at the notch towards the bottom of the phone. Use your fingernail to pry up.
1024
Step 2
Screw removal
- Remove these nine screws with a small philips screwdriver. They are all of the same size
- There is a small screw hidden under the warranty sticker. You may either remove or poke through it.
- WARNING by doing this you will void your manufacturer warranty.
Remove these nine screws with a small philips screwdriver. They are all of the same size
There is a small screw hidden under the warranty sticker. You may either remove or poke through it.
WARNING by doing this you will void your manufacturer warranty.
Step 3
Rear panel removal
- Use the Spudger to gently separate the panel from the frame, starting from the bottom left corner.
- Then work your way along the edges of the phone.
Use the Spudger to gently separate the panel from the frame, starting from the bottom left corner.
Then work your way along the edges of the phone.
Step 4
Separate back panel and frame
- Continue using the spudger around the back panel of the phone to separate both pieces.
- Once you have gone around the entire frame, use both hands to pull it apart.
Continue using the spudger around the back panel of the phone to separate both pieces.
Once you have gone around the entire frame, use both hands to pull it apart.
Step 5
Speaker Removal
- Use a pair of tweezers to grab the speaker assembly from the back of the panel and gently remove the it from the frame. (double sided tape is used to hold it together)
- Install the new speaker, and follow the guide in reverse to reassemble the phone.
Use a pair of tweezers to grab the speaker assembly from the back of the panel and gently remove the it from the frame. (double sided tape is used to hold it together)
Install the new speaker, and follow the guide in reverse to reassemble the phone.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Julio
Member since: 10/25/2014
695 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
Gateway, Team 1-5, Johnson Fall 2014
Member of Gateway, Team 1-5, Johnson Fall 2014
GCC-JOHNSON-F14S1G5
3 Members
6 Guides authored
Shamar Houston - Dec 30, 2015
Reply
where can i get the Loud speaker