Difficulty

Moderate

Steps

5

Time Required

                          15 minutes

Sections

1

  • Rear Facing Camera
  • 5 steps

Flags

2

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackBLUE Life One L120

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Remove back panel
  • Remove the cover by lifting the notch towards the bottom of the phone. Use your fingernail to lift it up.

Remove the cover by lifting the notch towards the bottom of the phone. Use your fingernail to lift it up.

1024

Step 2

              Screw Removal
  • Remove these nine screws with a small phillips screwdriver. They are all the same size.
  • There is a small screw hidden under the warranty sticker. You may either remove or poke through it .

Remove these nine screws with a small phillips screwdriver. They are all the same size.

There is a small screw hidden under the warranty sticker. You may either remove or poke through it .

Step 3

              Rear Panel  removal
  • Use the pry tool to gently separate the panel from the frame, starting from the bottom left corner and continue along the edge of the phone.
  • WARNING by doing this, you will void the manufacturers warranty.

Use the pry tool to gently separate the panel from the frame, starting from the bottom left corner and continue along the edge of the phone.

WARNING by doing this, you will void the manufacturers warranty.

Step 4

              Separate back panel from frame
  • Continue using the pry tool around the back panel of the phone to separate both pieces.
  • Once you have gone around the entire frame, use both hands to pull it apart.

Continue using the pry tool around the back panel of the phone to separate both pieces.

Once you have gone around the entire frame, use both hands to pull it apart.

Step 5

              Camera Removal
  • Use the pry tool to disconnect the camera from the device.
  • Gently lift the camera up and use the tweezers to remove it from the phone.
  • Reinstall the camera. Then follow the guide in reverse to put the phone back together.

Use the pry tool to disconnect the camera from the device.

Gently lift the camera up and use the tweezers to remove it from the phone.

Reinstall the camera. Then follow the guide in reverse to put the phone back together.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Julio

Member since: 10/25/2014

695 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Gateway, Team 1-5, Johnson Fall 2014                        

                                                  Member of Gateway, Team 1-5, Johnson Fall 2014 



                    GCC-JOHNSON-F14S1G5                     


                                            3 Members                     


                                            6 Guides authored