Blu Life Xl Rear Camera Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 20 minutes

Sections

Rear Camera
5 steps

Flags

BackBLU Life XL
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

This guide instructs you on how to remove the back cover of the phone and replace the rear camera.

What you need

Step 1

              Rear Camera

Turn the device off by holding down the power button for up to 5 seconds and then tapping the “Power off” button on the screen.
Remove the rear cover using your hands at the lip on the device back cover. No tools required.
Remove the battery by lifting the lower edge of the battery up first.

Turn the device off by holding down the power button for up to 5 seconds and then tapping the “Power off” button on the screen.

Remove the rear cover using your hands at the lip on the device back cover. No tools required.

Remove the battery by lifting the lower edge of the battery up first.

1024

Step 2

Remove the 12x3mm screws from the rear plate using the Phillips#000 screwdriver.

Remove the 12x3mm screws from the rear plate using the Phillips#000 screwdriver.

Step 3

Insert the plastic prying tool in between the plastic frame and the device.
Keep the phone on the surface with its screen down.

Insert the plastic prying tool in between the plastic frame and the device.

Keep the phone on the surface with its screen down.

Step 4

Use the plastic prying tool to gently push the rear camera out from its socket.
Take the camera out and set it aside.

Use the plastic prying tool to gently push the rear camera out from its socket.

Take the camera out and set it aside.

Step 5

Carefully place the new camera in the camera socket.
Apply a little force on the top of the camera to slide it in the socket.
Pop the camera in the socket and make sure its stable.

Carefully place the new camera in the camera socket.

Apply a little force on the top of the camera to slide it in the socket.

Pop the camera in the socket and make sure its stable.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Shantanu Malhotra

Member since: 02/14/2018

178 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       USF Tampa, Team S2-G5, Eyestone Spring 2018                        

                                                  Member of USF Tampa, Team S2-G5, Eyestone Spring 2018 



                    USFT-EYESTONE-S18S2G5                     


                                            3 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team