Difficulty

Moderate

Steps

6

Time Required

                          10 - 20 minutes

Sections

3

  • Battery
  • 3 steps
  • Back Case
  • 2 steps
  • Rear Camera
  • 1 step

Flags

0

  • BackBLU Studio 5.0 II

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn off your phone before disassembling the device.
  • Locate the small opening on the bottom corner of the back case.

Turn off your phone before disassembling the device.

Locate the small opening on the bottom corner of the back case.

1024

Step 2

  • Use your finger to open the back case by slowly pulling it on the open slot.
  • Once the case is lifted on the corner, slide your finger along the edge of the phone to remove the rest of the case.

Use your finger to open the back case by slowly pulling it on the open slot.

Once the case is lifted on the corner, slide your finger along the edge of the phone to remove the rest of the case.

Step 3

  • Locate the opening slot at the bottom of the battery.
  • Use your finger to lift the battery and remove it from the case.

Locate the opening slot at the bottom of the battery.

Use your finger to lift the battery and remove it from the case.

Step 4

              Back Case
  • Locate the four 3mm screws on each side of the back panel.
  • Use a Phillips #00 screwdriver to remove the eight screws.

Locate the four 3mm screws on each side of the back panel.

Use a Phillips #00 screwdriver to remove the eight screws.

Step 5

  • Carefully use a spudger to start opening the back case by inserting it between the black and blue lines on the side of the phone.
  • With the help of your fingers, continue to remove the back case by sliding it through the opening.

Carefully use a spudger to start opening the back case by inserting it between the black and blue lines on the side of the phone.

With the help of your fingers, continue to remove the back case by sliding it through the opening.

Step 6

              Rear Camera
  • Locate the camera, which is centered on the upper part of the motherboard.
  • Use tweezers to lift the camera slowly.
  • Carefully pull the camera out of the motherboard.

Locate the camera, which is centered on the upper part of the motherboard.

Use tweezers to lift the camera slowly.

Carefully pull the camera out of the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Ricardo Sarabia

Member since: 02/09/2016

1,042 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team 7-5, Cheng Spring 2016                        

                                                  Member of USF Tampa, Team 7-5, Cheng Spring 2016 



                    USFT-CHENG-S16S7G5                     


                                            3 Members                     


                                            7 Guides authored