Blu Studio 5 5 Volume Control Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 - 7 minutes

Sections

Battery
3 steps
Back Panel Assembly
2 steps
Volume Control
1 step

Flags

BackBLU Studio 5.5
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Locate the notch to remove the back panel at the lower left corner of the panel.
Insert the plastic opening tool or a fingernail into the notch.
Apply force upwards until back panel becomes loosened.

Locate the notch to remove the back panel at the lower left corner of the panel.

Insert the plastic opening tool or a fingernail into the notch.

Apply force upwards until back panel becomes loosened.

1024

Step 2

Remove the loosened back panel and set aside.
Locate the notch to remove the battery.

Remove the loosened back panel and set aside.

Locate the notch to remove the battery.

Step 3

Insert a plastic opening tool or your fingernail into the notch and apply force upwards until the battery is loosened.
Remove the battery and set aside.

Insert a plastic opening tool or your fingernail into the notch and apply force upwards until the battery is loosened.

Remove the battery and set aside.

Step 4

              Back Panel Assembly

Locate all twelve screws along the back panel:
Seven 5mm screws.
Five 3.5mm screws.
Using a Phillips #000 screwdriver, remove all twelve screws.

Locate all twelve screws along the back panel:

Seven 5mm screws.

Five 3.5mm screws.

Using a Phillips #000 screwdriver, remove all twelve screws.

Step 5

Now that all the screws have been removed, use a plastic opening tool to carefully pry at each of the corners until loosened.
Be extra careful when prying open as it may damage or snap the thin sides of the panel.
Place the plastic opening tool inside the loosened panel and gently push upwards and move along the phone to remove the back panel.
Remove the panel as if you were turning the page of a book.

Now that all the screws have been removed, use a plastic opening tool to carefully pry at each of the corners until loosened.

Be extra careful when prying open as it may damage or snap the thin sides of the panel.

Place the plastic opening tool inside the loosened panel and gently push upwards and move along the phone to remove the back panel.

Remove the panel as if you were turning the page of a book.

Step 6

              Volume Control

Once the back panel is removed, locate the volume controller.
Grab the volume controller with either your fingers or tweezers and gently remove from the phone.
Set replaced volume controller aside and gently insert replacement controller.

Once the back panel is removed, locate the volume controller.

Grab the volume controller with either your fingers or tweezers and gently remove from the phone.

Set replaced volume controller aside and gently insert replacement controller.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Jair Riech

Member since: 02/28/2017

173 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team S1-G6, Nance Spring 2017                        

                                                  Member of USF Tampa, Team S1-G6, Nance Spring 2017 



                    USFT-NANCE-S17S1G6                     


                                            3 Members                     


                                            8 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team