Blu Studio 7 0 Ii Rear Camera Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Back Cover
3 steps
Rear Camera
1 step

Flags

BackBLU Studio 7.0 II
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Cover

Locate the seam between the black and silver pieces of the phone.
Insert a plastic opening tool into the seam and firmly pry the black back piece away from the silver front piece.
To create the initial separation for the plastic opening tool, you may need to use either a spudger or metal spudger. If you use a metal spudger, be aware this can damage your phone if you aren’t careful.

Locate the seam between the black and silver pieces of the phone.

Insert a plastic opening tool into the seam and firmly pry the black back piece away from the silver front piece.

To create the initial separation for the plastic opening tool, you may need to use either a spudger or metal spudger. If you use a metal spudger, be aware this can damage your phone if you aren’t careful.

1024

Step 2

Work your way around the edge of phone, firmly prying the pieces apart.

Work your way around the edge of phone, firmly prying the pieces apart.

Step 3

Once the back has been removed, you can snap the new one into place by pressing firmly around the edges with your fingers.

Once the back has been removed, you can snap the new one into place by pressing firmly around the edges with your fingers.

Step 4

              Rear Camera

The camera is located in the top left of the frame (if the screen is on the table and the top of the phone is farthest from you).
To remove it, grip the lens itself (the black part) with a pair of precision tweezers and lift straight up.
The camera is connected to the motherboard with a simple clip connection. This will release as you pull.

The camera is located in the top left of the frame (if the screen is on the table and the top of the phone is farthest from you).

To remove it, grip the lens itself (the black part) with a pair of precision tweezers and lift straight up.

The camera is connected to the motherboard with a simple clip connection. This will release as you pull.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Abby

Member since: 05/14/2016

852 Reputation

                                      5 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       Metro State, Team 1-2, Carpenter SU 2016                        

                                                  Member of Metro State, Team 1-2, Carpenter SU 2016 



                    MSU-CARPENTER-SU16S1G2                     


                                            4 Members                     


                                            6 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team