Blu Studio Selfie Rear Facing Camera Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

4

• Rear Cover
• 2 steps
• Battery
• 1 step
• Midframe
• 3 steps
• Rear Facing Camera
• 1 step

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

• BackBlu Studio Selfie

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Cover               

• Make sure your phone is powered off.
• Turn the front of the phone away from you.
• Run your fingers along the sides of the phone to identify where the case can be pulled apart.

Make sure your phone is powered off.

Turn the front of the phone away from you.

Run your fingers along the sides of the phone to identify where the case can be pulled apart.

1024

Step 2

• Insert the flat end of your plastic opening into the crevice you found along the side of the phone.
• Gently apply pressure until you feel the back case pop free of the phone.
• Continue the previous two steps around the rest of the phone until the case is fully removed.

Insert the flat end of your plastic opening into the crevice you found along the side of the phone.

Gently apply pressure until you feel the back case pop free of the phone.

Continue the previous two steps around the rest of the phone until the case is fully removed.

Step 3

              Battery               

• Identify the crevice at the bottom of the battery.
• There should be enough space for you to fit your fingernail between the battery and the phone.
• Gently lift the battery free of the phone.

Identify the crevice at the bottom of the battery.

There should be enough space for you to fit your fingernail between the battery and the phone.

Gently lift the battery free of the phone.

Step 4

              Midframe               

• Remove all the 4mm Phillips #000 screws from the midframe.

Remove all the 4mm Phillips #000 screws from the midframe.

Step 5

• Insert the spudger between the midframe and the display assembly.
• Gently pry up the midframe.
• When working with electronics, it’s important to choose a tool that’s ESD-safe to avoid accidental damage to the device. The metal spudger is great when you need serious prying power, but the regular black nylon spudger or a plastic opening tool should be used whenever possible.

Insert the spudger between the midframe and the display assembly.

Gently pry up the midframe.

When working with electronics, it’s important to choose a tool that’s ESD-safe to avoid accidental damage to the device. The metal spudger is great when you need serious prying power, but the regular black nylon spudger or a plastic opening tool should be used whenever possible.

Step 6

• Where the battery rested before, you will find a small clip that holds down the midframe.
• After the rest of the midframe is detached, from the phone place the flat end of the spudger beneath the clip.
• Gently lift up on the clip until it comes free.
• Remove the midframe from the phone.

Where the battery rested before, you will find a small clip that holds down the midframe.

After the rest of the midframe is detached, from the phone place the flat end of the spudger beneath the clip.

Gently lift up on the clip until it comes free.

Remove the midframe from the phone.

Step 7

              Rear Facing Camera               

• Flip up the retaining flap on the camera cable ZIF connector.
• Pull the camera’s ribbon cable straight out of its socket.
• Gently remove the rear facing camera.

Flip up the retaining flap on the camera cable ZIF connector.

Pull the camera’s ribbon cable straight out of its socket.

Gently remove the rear facing camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Stacy Kam                     

Member since: 01/20/2016

630 Reputation

                                      5 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       USF Tampa, Team 10-1, Remmell Spring 2016                        

                                                  Member of USF Tampa, Team 10-1, Remmell Spring 2016 



                    USFT-REMMELL-S16S10G1                     


                                            4 Members                     


                                            6 Guides authored