Difficulty

Moderate

Steps

7

Time Required

                          6 minutes

Sections

5

  • Back Panel
  • 1 step
  • Battery
  • 1 step
  • Front Panel
  • 2 steps
  • Motherboard
  • 2 steps
  • Outer Lens
  • 1 step

Flags

0

  • BackBLU Tank II

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • With the screen facing you, find the left corner of the phone. There should be a visible groove.
  • With your fingers, carefully press a fingernail into the slot and separate the back panel from the phone.

With the screen facing you, find the left corner of the phone. There should be a visible groove.

With your fingers, carefully press a fingernail into the slot and separate the back panel from the phone.

1024

Step 2

              Battery
  • After the back panel has been removed, put your finger on and press down on the bottom part of the battery.
  • Lift the battery up and carefully remove the battery.

After the back panel has been removed, put your finger on and press down on the bottom part of the battery.

Lift the battery up and carefully remove the battery.

Step 3

              Front Panel
  • Using the phillips head screwdriver, remove all 5 2.5mm screws.

Using the phillips head screwdriver, remove all 5 2.5mm screws.

Step 4

  • Wedge the blue plastic iFixit opening tool between the front plate and the outer lens plate.
  • Carefully separate the front plate from all sides of the phone.

Wedge the blue plastic iFixit opening tool between the front plate and the outer lens plate.

Carefully separate the front plate from all sides of the phone.

Step 5

              Motherboard
  • Locate the two 2.5mm screws (red circles in image) and remove them with the Philips 00 screwdriver used previously.

Locate the two 2.5mm screws (red circles in image) and remove them with the Philips 00 screwdriver used previously.

Step 6

  • Once screws are removed, separate the motherboard and outer lens by carefully pushing the motherboard out with your hand as displayed in the image.

Once screws are removed, separate the motherboard and outer lens by carefully pushing the motherboard out with your hand as displayed in the image.

Step 7

              Outer Lens
  • Once separated from the motherboard, the outer lens can now be replaced.

Once separated from the motherboard, the outer lens can now be replaced.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    David Kelchner

Member since: 03/08/2017

632 Reputation

                                      6 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team S6-G2, Isaacson Spring 2017                        

                                                  Member of UMass Dartmouth, Team S6-G2, Isaacson Spring 2017 



                    UMASSD-ISAACSON-S17S6G2                     


                                            4 Members                     


                                            6 Guides authored