Blu Vivo 5 Mini Back Cover Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          45 minutes

Sections

Back Cover
4 steps

Flags

BackBLU Vivo 5 Mini
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

This guide instructs you to remove the back panel encasing; with the purpose to remove internal items such as battery, camera, speaker, charging port etc.

For better performance and a longer lasting charge: Drain battery below 10% , and then proceed to charge it without interruptions to 100%.

What you need

Step 1

              Back Cover

Remove the 2 screws along the bottom on either side of the speaker port with the size 2 Pentalobe driver.
After screws are removed, dislodge the speaker and charger port cover from device using the tweezers.

Remove the 2 screws along the bottom on either side of the speaker port with the size 2 Pentalobe driver.

After screws are removed, dislodge the speaker and charger port cover from device using the tweezers.

1024

Step 2

Remove the top and bottom covers.
Start by sliding the pick around the edges of both covers. (If you have the glue adhesive removal tool use that instead of pick, as it creates less damage.)
After freeing the edges gentle start peeling the covers off.

Remove the top and bottom covers.

Start by sliding the pick around the edges of both covers. (If you have the glue adhesive removal tool use that instead of pick, as it creates less damage.)

After freeing the edges gentle start peeling the covers off.

Step 3

Using a Phillips #000, remove all 10 screws found on the back of the phone.
The 6 on the bottom are to be removed with a size PH000 Phillips Head screwdriver.
The 4 on the top can be removed with the same screwdriver.

Using a Phillips #000, remove all 10 screws found on the back of the phone.

The 6 on the bottom are to be removed with a size PH000 Phillips Head screwdriver.

The 4 on the top can be removed with the same screwdriver.

Step 4

Completely remove SIM card port from side of phone using the SIM Card Eject Tool.
Release the back cover (it may be glued down encasing the phone) using the suction device to lift the back off.
Begin inserting the pick sliding it between the back of the phone and the cover to completely remove back cover, if suction does not lift.

Completely remove SIM card port from side of phone using the SIM Card Eject Tool.

Release the back cover (it may be glued down encasing the phone) using the suction device to lift the back off.

Begin inserting the pick sliding it between the back of the phone and the cover to completely remove back cover, if suction does not lift.

To reassemble your device, follow these instructions in reverse order.

You can also use steps 1-4 for any other internal replacement.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors

                    Kymari

Member since: 10/09/2018

710 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Sam Houston State, Team S15-G6, Blackburne Fall 2018                        

                                                  Member of Sam Houston State, Team S15-G6, Blackburne Fall 2018 



                    SHSU-BLACKBURNE-F18S15G6                     


                                            3 Members                     


                                            5 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team