Difficulty
Difficult
Steps
8
Time Required
30 minutes
Sections
2
- Back Cover
- 4 steps
- Camera
- 4 steps
Flags
0
BackBLU Vivo 5 Mini
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
After completing the prerequisite locate the camera, which is near top left corner of device.
What you need
Step 1
Back Cover
- Remove the 2 screws along the bottom on either side of the speaker port with the size 2 Pentalobe driver.
- After screws are removed, dislodge the speaker and charger port cover from device using the tweezers.
Remove the 2 screws along the bottom on either side of the speaker port with the size 2 Pentalobe driver.
After screws are removed, dislodge the speaker and charger port cover from device using the tweezers.
1024
Step 2
- Remove the top and bottom covers.
- Start by sliding the pick around the edges of both covers. (If you have the glue adhesive removal tool use that instead of pick, as it creates less damage.)
- After freeing the edges gentle start peeling the covers off.
Remove the top and bottom covers.
Start by sliding the pick around the edges of both covers. (If you have the glue adhesive removal tool use that instead of pick, as it creates less damage.)
After freeing the edges gentle start peeling the covers off.
Step 3
- Using a Phillips #000, remove all 10 screws found on the back of the phone.
- The 6 on the bottom are to be removed with a size PH000 Phillips Head screwdriver.
- The 4 on the top can be removed with the same screwdriver.
Using a Phillips #000, remove all 10 screws found on the back of the phone.
The 6 on the bottom are to be removed with a size PH000 Phillips Head screwdriver.
The 4 on the top can be removed with the same screwdriver.
Step 4
- Completely remove SIM card port from side of phone using the SIM Card Eject Tool.
- Release the back cover (it may be glued down encasing the phone) using the suction device to lift the back off.
- Begin inserting the pick sliding it between the back of the phone and the cover to completely remove back cover, if suction does not lift.
Completely remove SIM card port from side of phone using the SIM Card Eject Tool.
Release the back cover (it may be glued down encasing the phone) using the suction device to lift the back off.
Begin inserting the pick sliding it between the back of the phone and the cover to completely remove back cover, if suction does not lift.
Step 5
Camera
- Using tweezers, remove the top black encasing of the camera.
Using tweezers, remove the top black encasing of the camera.
Step 6
- Using the tweezers unlink the camera gently from the gold wire
Using the tweezers unlink the camera gently from the gold wire
Step 7
- Gently lift the back camera from the phone.
- Be careful not to smudge the lens. At this time, also check for debris.
Gently lift the back camera from the phone.
Be careful not to smudge the lens. At this time, also check for debris.
Step 8
- Use the spudger to gently lift the motherboard out of the device.
- After completely removing the back camera and motherboard, now check underneath for debris near front lens.
- Front lens can now be removed for replacement.
Use the spudger to gently lift the motherboard out of the device.
After completely removing the back camera and motherboard, now check underneath for debris near front lens.
Front lens can now be removed for replacement.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Kymari
Member since: 10/09/2018
710 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
Sam Houston State, Team S15-G6, Blackburne Fall 2018
Member of Sam Houston State, Team S15-G6, Blackburne Fall 2018
SHSU-BLACKBURNE-F18S15G6
3 Members
5 Guides authored
