Blu Vivo One Plus Screen Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          30 - 55 minutes

Sections

Battery
6 steps
Screen
2 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

BackBLU Vivo One Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Use the SIM Card Eject Tool to remove the SIM card slot from the phone.
Using a Phillips 000 screwdriver, remove the 1.5 mm metal screw located inside the SIM card slot gap.

Use the SIM Card Eject Tool to remove the SIM card slot from the phone.

Using a Phillips 000 screwdriver, remove the 1.5 mm metal screw located inside the SIM card slot gap.

1024

Step 2

Use the plastic opening tool and run it under the entire seam that separates the screen and the plastic back of the phone.
Lodge the plastic opening tool under the back cover and use it to pry the two parts apart slowly.
This step will take a decent amount of force and it may seem as though the device will fracture, but you must keep pulling until the back releases.

Use the plastic opening tool and run it under the entire seam that separates the screen and the plastic back of the phone.

Lodge the plastic opening tool under the back cover and use it to pry the two parts apart slowly.

This step will take a decent amount of force and it may seem as though the device will fracture, but you must keep pulling until the back releases.

Step 3

Using a Phillips 000 screwdriver, remove the 14 1.5 mm screws that attach the plastic protection cover to the phone.
Removing the screws will cause a silver metal bracket by the top left corner of the battery to fall off. Keep track of it for later.

Using a Phillips 000 screwdriver, remove the 14 1.5 mm screws that attach the plastic protection cover to the phone.

Removing the screws will cause a silver metal bracket by the top left corner of the battery to fall off. Keep track of it for later.

Step 4

After removing the screws, the bottom plastic cover will need to be removed to expose the rest of the phone’s interior.
The plastic cover should come off easily using your fingers, but you may need the spudger or an opening pick to remove it.
Remove the cover by its sides to ensure the removal is as easy as possible.

After removing the screws, the bottom plastic cover will need to be removed to expose the rest of the phone’s interior.

The plastic cover should come off easily using your fingers, but you may need the spudger or an opening pick to remove it.

Remove the cover by its sides to ensure the removal is as easy as possible.

Step 5

Remove the two blue strips of tape on the lower portion of the battery.
After removing the blue strips of tape gently begin wedging the plastic picks underneath the battery and locating the adhesive tape strips.
Utilize the picks in a fashion that both pries the battery upward and scrapes the adhesive either loose from the battery or phone body. Be careful not to bend or damage the battery and it should eventually come free from the housing.

Remove the two blue strips of tape on the lower portion of the battery.

After removing the blue strips of tape gently begin wedging the plastic picks underneath the battery and locating the adhesive tape strips.

Utilize the picks in a fashion that both pries the battery upward and scrapes the adhesive either loose from the battery or phone body. Be careful not to bend or damage the battery and it should eventually come free from the housing.

Step 6

Desolder the three wires (red, yellow, black) that connect the battery to the motherboard in the top right-hand corner. Use the link listed to safely desolder your battery. Video link to desolder.
You can also read the How to Solder and Desolder Connections guide for more information on soldering connections.

Desolder the three wires (red, yellow, black) that connect the battery to the motherboard in the top right-hand corner. Use the link listed to safely desolder your battery. Video link to desolder.

You can also read the How to Solder and Desolder Connections guide for more information on soldering connections.

Step 7

              Screen

De-solder the black wire that connects the screen to the motherboard by clicking here.
Make sure to be careful when using soldering equipment

De-solder the black wire that connects the screen to the motherboard by clicking here.

Make sure to be careful when using soldering equipment

Step 8

Using a heat gun or iFixit’s iOpener from the iOpener kit, heat up the edges of the screen to loosen the adhesive underneath
Carefully remove the screen.

Using a heat gun or iFixit’s iOpener from the iOpener kit, heat up the edges of the screen to loosen the adhesive underneath

Carefully remove the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Bradley Hydorn

Member since: 09/16/2019

225 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Embry-Riddle Aeronautical University, Team S23-G1, McClure Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S23-G1, McClure Fall 2019 



                    ERAU-MCCLURE-F19S23G1                     


                                            4 Members                     


                                            5 Guides authored

Yuh Fada - Dec 19, 2020

Where can I get a screen replacement to order, I need one asap

Needs Better Images#

Needs More Images#

Introduction#

What you need#

Team#

Needs Better Images

Needs More Images

Introduction

What you need

Team