Difficulty

Easy

Steps

6

Time Required

                          30 minutes            

Sections

1

  • BMW Front Kidney Grille
  • 6 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackBMW

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Prep Work               
  • You will need to remove a couple of bolts on the front bumper before you can start removing the BMW factory kidney grille.

You will need to remove a couple of bolts on the front bumper before you can start removing the BMW factory kidney grille.

1024

Step 2

              Taking out the factory kidney grille               
  • When you have enough clearance space, you can wedge your hand in between the gap to pop out the stock kidney grille.
  • Keep maneuvering your hand in the space to ease the stock grille out.

When you have enough clearance space, you can wedge your hand in between the gap to pop out the stock kidney grille.

Keep maneuvering your hand in the space to ease the stock grille out.

Step 3

              Watch out for the clips               
  • Detach the stock kidney grille from the clips holding it onto the BMW front bumper.

Detach the stock kidney grille from the clips holding it onto the BMW front bumper.

Step 4

              Starting the swap               
  • Pull out the factory kidney grille.

Pull out the factory kidney grille.

Step 5

              Putting in the new LED kidney grille               
  • Use your hand to apply a bit of pressure to pop the new LED M-stripe kidney grille in place
  • Secure the new LED grille onto the clips.
  • Note: the M-Colored LED stripe is only on the right grille assembly.
  • Tap the wire to the ACC or other 12V power source.
  • Repeat on the other side.

Use your hand to apply a bit of pressure to pop the new LED M-stripe kidney grille in place

Secure the new LED grille onto the clips.

Note: the M-Colored LED stripe is only on the right grille assembly.

Tap the wire to the ACC or other 12V power source.

Repeat on the other side.

Step 6

              Put everything back               
  • Put the bolts back into the BMW front bumper.
  • Enjoy your new M-Colored BMW LED Illuminated kidney grille.

Put the bolts back into the BMW front bumper.

Enjoy your new M-Colored BMW LED Illuminated kidney grille.

You can see that you didn’t need to be an advanced car installer to attempt this. This makes the installation great for beginners as well as seasoned car fans alike.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Eric Wu                     

Member since: 01/21/2015

3,267 Reputation

                                      23 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges