Difficulty
Moderate
Steps
9
Time Required
Suggest a time??
Sections
1
- Plasticgear in the transfercase
- 9 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackBMW X3 3.0d (E83)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Step 1
Lift the car up
- Lift your car with a carlift.
Lift your car with a carlift.
1024
Step 2
Transmissionjack
- Place a transmissionjack under your transmission.
Place a transmissionjack under your transmission.
Step 3
Remove Transmissioncarrier
- Remove the transmissioncarrier.
Remove the transmissioncarrier.
Step 4
Remove Heatshield
- Remove the heatshield (you can remove one screw and bend it back).
Remove the heatshield (you can remove one screw and bend it back).
Step 5
Remove Servomotor
- Remove the servomotor (four ET10 screws and the cable).
Remove the servomotor (four ET10 screws and the cable).
Step 6
Remove Motor
- Remove the motor by uscrewing the four T25 screws.
Remove the motor by uscrewing the four T25 screws.
Step 7
Remove Gasket
- Remove the gasket with the metalplate.
Remove the gasket with the metalplate.
Step 8
Remove Snapring
- Remove the snapring and the washer underneath.
Remove the snapring and the washer underneath.
Step 9
Remove Plasticgear
- Remove the plasticgear.
Remove the plasticgear.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Veit Aulenberg
Member since: 12/05/2018
169 Reputation
1 Guide authored
Badges:
1
