Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

2

  • Open bObi Pet Robotic Vacuum for Repair
  • 6 steps
  • Screen
  • 2 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackbObi Pet Robotic Vacuum and Mop

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Turn bObi Pet Off
  • Before we get started, turn bObi Pet OFF and flip her over onto a flat surface.
  • Next, remove bObi Pet’s dustbin. Grip the small tab on the back of the bin, and pull to remove.

Before we get started, turn bObi Pet OFF and flip her over onto a flat surface.

Next, remove bObi Pet’s dustbin. Grip the small tab on the back of the bin, and pull to remove.

1024

Step 2

              Remove the Front Wheel
  • Grip the front wheel and pull straight up, using the screwdriver for leverage.
  • The wheel will pop out and you will see two screws beneath it.
  • There is a larger screw set deeper in the wheel compartment. Use the screwdriver to remove it.
  • Remember to keep all screws and parts removed from bObi Pet safely aside during the repair. They may be needed for re-assembly.

Grip the front wheel and pull straight up, using the screwdriver for leverage.

The wheel will pop out and you will see two screws beneath it.

There is a larger screw set deeper in the wheel compartment. Use the screwdriver to remove it.

Remember to keep all screws and parts removed from bObi Pet safely aside during the repair. They may be needed for re-assembly.

Step 3

              Remove the Dustbin's Holders
  • Remove the screws on both sides of bObi Pet’s dustbin. Then, remove the corner pieces that were held down by the screws.
  • Grip the brush compartment and pull down to reveal two screws on a red fastener.
  • Remove them with the screwdriver.

Remove the screws on both sides of bObi Pet’s dustbin. Then, remove the corner pieces that were held down by the screws.

Grip the brush compartment and pull down to reveal two screws on a red fastener.

Remove them with the screwdriver.

Step 4

              Remove the Main Brush Attachment
  • Pull the brush compartment up until the fastener is freed from bObi Pet. Then, detach the brush compartment’s circuit plug and set it aside.
  • Remove the 4 screws located beneath the brush compartment.

Pull the brush compartment up until the fastener is freed from bObi Pet. Then, detach the brush compartment’s circuit plug and set it aside.

Remove the 4 screws located beneath the brush compartment.

Step 5

              Remove the Cover Screws
  • Remove the 2 screws on the dustbin’s red fastener.
  • Remove the fastener and set it aside for reassembly.
  • The cover is no longer secured, so carefully flip bObi Pet onto her wheels.

Remove the 2 screws on the dustbin’s red fastener.

Remove the fastener and set it aside for reassembly.

The cover is no longer secured, so carefully flip bObi Pet onto her wheels.

Step 6

              Detach the Cover
  • Lift the cover to reveal the main board underneath.
  • Remove the two circuit plugs connecting the lid to the mainboard.
  • bObi Pet’s cover is entirely separated, and you may now access any of her internal parts for replacement.

Lift the cover to reveal the main board underneath.

Remove the two circuit plugs connecting the lid to the mainboard.

bObi Pet’s cover is entirely separated, and you may now access any of her internal parts for replacement.

Step 7

              Remove the Screen
  • Remove the four screws holding bObi Pet’s screen.
  • Then, lift it straight up and out to make space for the replacement.

Remove the four screws holding bObi Pet’s screen.

Then, lift it straight up and out to make space for the replacement.

Step 8

              Place the New Screen
  • Lay the new screen in the open space on bObi Pet’s lid.
  • Align the screw holes on the screen with the screw posts in bObi Pet and push down until it lies flat.
  • Install all four screws, and you’ll be ready to close bObi Pet. See the following instructions: Assemble bObi Pet Post-Repair

Lay the new screen in the open space on bObi Pet’s lid.

Align the screw holes on the screen with the screw posts in bObi Pet and push down until it lies flat.

Install all four screws, and you’ll be ready to close bObi Pet. See the following instructions: Assemble bObi Pet Post-Repair

To reassemble bObi Pet, see this tutorial: Assemble bObi Pet Post-Repair

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Chelsea

Member since: 09/24/2014

2,278 Reputation

                                      31 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges