Bobi Pet Speaker Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

Suggest a time??

Sections

Open bObi Pet Robotic Vacuum for Repair
6 steps
Speaker
3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackbObi Pet Robotic Vacuum and Mop
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Turn bObi Pet Off

Before we get started, turn bObi Pet OFF and flip her over onto a flat surface.
Next, remove bObi Pet’s dustbin. Grip the small tab on the back of the bin, and pull to remove.

Before we get started, turn bObi Pet OFF and flip her over onto a flat surface.

Next, remove bObi Pet’s dustbin. Grip the small tab on the back of the bin, and pull to remove.

1024

Step 2

              Remove the Front Wheel

Grip the front wheel and pull straight up, using the screwdriver for leverage.
The wheel will pop out and you will see two screws beneath it.
There is a larger screw set deeper in the wheel compartment. Use the screwdriver to remove it.
Remember to keep all screws and parts removed from bObi Pet safely aside during the repair. They may be needed for re-assembly.

Grip the front wheel and pull straight up, using the screwdriver for leverage.

The wheel will pop out and you will see two screws beneath it.

There is a larger screw set deeper in the wheel compartment. Use the screwdriver to remove it.

Remember to keep all screws and parts removed from bObi Pet safely aside during the repair. They may be needed for re-assembly.

Step 3

              Remove the Dustbin's Holders

Remove the screws on both sides of bObi Pet’s dustbin. Then, remove the corner pieces that were held down by the screws.
Grip the brush compartment and pull down to reveal two screws on a red fastener.
Remove them with the screwdriver.

Remove the screws on both sides of bObi Pet’s dustbin. Then, remove the corner pieces that were held down by the screws.

Grip the brush compartment and pull down to reveal two screws on a red fastener.

Remove them with the screwdriver.

Step 4

              Remove the Main Brush Attachment

Pull the brush compartment up until the fastener is freed from bObi Pet. Then, detach the brush compartment’s circuit plug and set it aside.
Remove the 4 screws located beneath the brush compartment.

Pull the brush compartment up until the fastener is freed from bObi Pet. Then, detach the brush compartment’s circuit plug and set it aside.

Remove the 4 screws located beneath the brush compartment.

Step 5

              Remove the Cover Screws

Remove the 2 screws on the dustbin’s red fastener.
Remove the fastener and set it aside for reassembly.
The cover is no longer secured, so carefully flip bObi Pet onto her wheels.

Remove the 2 screws on the dustbin’s red fastener.

Remove the fastener and set it aside for reassembly.

The cover is no longer secured, so carefully flip bObi Pet onto her wheels.

Step 6

              Detach the Cover

Lift the cover to reveal the main board underneath.
Remove the two circuit plugs connecting the lid to the mainboard.
bObi Pet’s cover is entirely separated, and you may now access any of her internal parts for replacement.

Lift the cover to reveal the main board underneath.

Remove the two circuit plugs connecting the lid to the mainboard.

bObi Pet’s cover is entirely separated, and you may now access any of her internal parts for replacement.

Step 7

              Remove the Speaker

bObi Pet’s speaker is located on top of her front wheel. Remove the two screws securing the speaker onto bObi. Keep these screws close by for later reassembly.
Then, disconnect the small circuit plug on the top of the mainboard, near the front wheel.
The speaker will fall out of place underneath bObi Pet.

bObi Pet’s speaker is located on top of her front wheel. Remove the two screws securing the speaker onto bObi. Keep these screws close by for later reassembly.

Then, disconnect the small circuit plug on the top of the mainboard, near the front wheel.

The speaker will fall out of place underneath bObi Pet.

Step 8

              Place a New Speaker

Remove bObi Pet’s speaker from underneath her.
Place the new speaker in the empty space with the wires poking through the opening in bObi Pet.

Remove bObi Pet’s speaker from underneath her.

Place the new speaker in the empty space with the wires poking through the opening in bObi Pet.

Step 9

              Secure the Speaker

Then, reattach the circuit plug to the main board. Re-install the two screws and you’re ready to close the cover.
You will have to hold the speaker from underneath to align the screws with the screw posts on the speaker.
Continue to the guide for closing bObi Pet: Assemble bObi Pet Post-Repair

Then, reattach the circuit plug to the main board. Re-install the two screws and you’re ready to close the cover.

You will have to hold the speaker from underneath to align the screws with the screw posts on the speaker.

Continue to the guide for closing bObi Pet: Assemble bObi Pet Post-Repair

For assistance re-assembling bObi Pet, see the guide on closing the cover: Assemble bObi Pet Post-Repair

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Chelsea

Member since: 09/24/2014

2,278 Reputation

                                      31 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Member-Contributed Guide#

Introduction#

What you need#

Member-Contributed Guide

Introduction

What you need