Difficulty

Easy

Steps

4

Time Required

                          5 - 10 minutes

Sections

1

  • Front Wheel
  • 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackbObi Robotic Vacuum

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Wheel
  • Turn the front wheel so it faces bObi’s front touch sensors.
  • Grip the wheel and pull straight up.
  • You may use a screwdriver for leverage when removing the wheel.

Turn the front wheel so it faces bObi’s front touch sensors.

Grip the wheel and pull straight up.

You may use a screwdriver for leverage when removing the wheel.

1024

Step 2

  • This step is only necessary when cleaning the wheel. Skip to step 4 for instructions on installing a new wheel.
  • To disassemble and deep clean the wheel, remove two small screws found on the bottom of the wheel. Then you can open it.
  • Grip the actual wheel and pull up to detach and clean beneath it. Use the screwdriver as leverage if you have difficulty separating the parts.

This step is only necessary when cleaning the wheel. Skip to step 4 for instructions on installing a new wheel.

To disassemble and deep clean the wheel, remove two small screws found on the bottom of the wheel. Then you can open it.

Grip the actual wheel and pull up to detach and clean beneath it. Use the screwdriver as leverage if you have difficulty separating the parts.

Step 3

  • This step is only necessary when cleaning bObi’s front wheel. Skip to step 4 for instructions on installing the wheel.
  • After cleaning, replace the small spring piece inside the wheel.
  • Hold the wheel cover back together and install the two screws.
  • Place the small wheel back in its space and apply pressure until it reattaches.

This step is only necessary when cleaning bObi’s front wheel. Skip to step 4 for instructions on installing the wheel.

After cleaning, replace the small spring piece inside the wheel.

Hold the wheel cover back together and install the two screws.

Place the small wheel back in its space and apply pressure until it reattaches.

Step 4

  • Place the wheel back in bObi. Make sure it faces in the same way as it did when removing (wheel closer to bObi’s front).
  • Push down and the wheel will attach to bObi.

Place the wheel back in bObi. Make sure it faces in the same way as it did when removing (wheel closer to bObi’s front).

Push down and the wheel will attach to bObi.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Chelsea

Member since: 09/24/2014

2,278 Reputation

                                      31 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges