Difficulty

Easy

Steps

7

Time Required

                          5 minutes

Sections

1

  • Speaker
  • 7 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackAlarm Clock

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker
  • Slide the clear plastic case off of the speaker

Slide the clear plastic case off of the speaker

1024

Step 2

  • Remove the batteries on the bottom of the radio
  • Locate and remove the five screws on the bottom of the radio with a Philips Head Screwdriver.
  • Make sure to keep your screws together so you don’t lose them.

Remove the batteries on the bottom of the radio

Locate and remove the five screws on the bottom of the radio with a Philips Head Screwdriver.

Make sure to keep your screws together so you don’t lose them.

Step 3

  • Grab your nylon pry tool and wedge it between the outer case and the top of the radio. Slowly pry open the top and remove it.
  • This may be more difficult to take off if the top hasn’t been removed before, but it may be easier to turn the clock upside down for this step.

Grab your nylon pry tool and wedge it between the outer case and the top of the radio. Slowly pry open the top and remove it.

This may be more difficult to take off if the top hasn’t been removed before, but it may be easier to turn the clock upside down for this step.

Step 4

  • Using a black nylon spudger to carefully break the glue around the outside of the speaker so it can be dislodged.

Using a black nylon spudger to carefully break the glue around the outside of the speaker so it can be dislodged.

Step 5

  • Locate the speaker plug for the speaker you wish to remove and slightly tug on it until it becomes unplugged
  • This can also be done with a pair of tweezers if you find there isn’t enough space.

Locate the speaker plug for the speaker you wish to remove and slightly tug on it until it becomes unplugged

This can also be done with a pair of tweezers if you find there isn’t enough space.

Step 6

  • After the speaker cord is removed, pull the speaker straight up and out of the radio.

After the speaker cord is removed, pull the speaker straight up and out of the radio.

Step 7

  • Once the speaker is removed, the inside of the dual alarm clock should look identical to the photo shown.

Once the speaker is removed, the inside of the dual alarm clock should look identical to the photo shown.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Mercy Adeshola

Member since: 02/20/2017

121 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       USF Tampa, Team 10-1, Remmell Spring 2017                        

                                                  Member of USF Tampa, Team 10-1, Remmell Spring 2017 



                    USFT-REMMELL-S17S10G1                     


                                            4 Members                     


                                            2 Guides authored