Bomann Db 774Cb Iron Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          10 minutes            

Sections

1

• Bomann DB 774CB Iron
• 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackClothes Iron

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Startup               

• Locate and extract the small plug (circled in the photo) and remove the screw hidden underneath.
• Unscrew and remove the back plate.

Locate and extract the small plug (circled in the photo) and remove the screw hidden underneath.

Unscrew and remove the back plate.

1024

Step 2

              Undressing the handle               

• Unclip the top of the handle from the back (clips circled in the photos).
• Unclip the top of the handle from the front (clips circled in the photo). Be careful not to break (like us) the steam nozzle!
• Pull out the steam control knobs.
• Carefully “tear” the temperature adjustment knob.

Unclip the top of the handle from the back (clips circled in the photos).

Unclip the top of the handle from the front (clips circled in the photo). Be careful not to break (like us) the steam nozzle!

Pull out the steam control knobs.

Carefully “tear” the temperature adjustment knob.

Step 3

              Stripping of the sole               

• Remove the screws and remove the plastic shell.
• Unscrew the screws and remove the base cover.

Remove the screws and remove the plastic shell.

Unscrew the screws and remove the base cover.

Step 4

              Breakdowns               

• Two different failures already observed:
• Spacer (circled) which had come out of its housing following a fall of the iron!
• Small foreign body that got stuck between the two contacts (circled).
• Be careful not to turn the temperature adjustment screw (arrow) located in the control rod. Its readjustment is quite tedious, by mistake and trials!

Two different failures already observed:

Spacer (circled) which had come out of its housing following a fall of the iron!

Small foreign body that got stuck between the two contacts (circled).

Be careful not to turn the temperature adjustment screw (arrow) located in the control rod. Its readjustment is quite tedious, by mistake and trials!

Putting each screw back in its place is no problem.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.                                             


        HelloMacOS is helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

HelloMacOS

Author

                                      with 3 other contributors 

                    Louis Possoz                     

Member since: 01/10/2015

411 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Repair Café Louvain-la-Neuve                        

                                                  Member of Repair Café Louvain-la-Neuve 



                    Community                     


                                            2 Members                     


                                            6 Guides authored                     

Nur Haque - Mar 20, 2018

Reply

Do you instructions in English