Difficulty

Moderate

Steps

4

Time Required

                          20 minutes

Sections

1

  • Rear Wheels
  • 4 steps

Flags

0

  • BackBoosted Board 1st Generation

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Wheels
  • Loosen the two 16.74 mm motor mount hex nut screws with a 9/64" Allen wrench.
  • Do Not Remove the Screws.

Loosen the two 16.74 mm motor mount hex nut screws with a 9/64" Allen wrench.

Do Not Remove the Screws.

1024

Step 2

  • Compress the motor mount back towards the wheel.
  • While keeping the motor mount compressed, tighten one of the hex nuts that you loosened in the previous step.
  • The motor mounts are spring tensioned so it is necessary compress them to loosen the belts.

Compress the motor mount back towards the wheel.

While keeping the motor mount compressed, tighten one of the hex nuts that you loosened in the previous step.

The motor mounts are spring tensioned so it is necessary compress them to loosen the belts.

Step 3

  • Remove the axel nut with a 1/2" socket wrench

Remove the axel nut with a 1/2" socket wrench

Step 4

  • Rotate and pull counterclockwise until the wheel comes off the axle completely.
  • The front washer will come off with the wheel.
  • Remove the back washer from the axle.
  • Replacing the wheel requires the bearings to be switched into the new wheel.

Rotate and pull counterclockwise until the wheel comes off the axle completely.

The front washer will come off with the wheel.

Remove the back washer from the axle.

Replacing the wheel requires the bearings to be switched into the new wheel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Emily Imfeld

Member since: 10/06/2016

514 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 15-7, Livingston Fall 2016                        

                                                  Member of Cal Poly, Team 15-7, Livingston Fall 2016 



                    CPSU-LIVINGSTON-F16S15G7                     


                                            4 Members                     


                                            6 Guides authored