Bosch Ixo 2Nd Gen Battery Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          15 - 20 minutes            

Sections

1

• Battery
• 6 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackBosch IXO 2. Generation

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Open cordless screwdriver               

• Loosen 4 screws size Torx T10. The screw size is identical for all four screws.

Loosen 4 screws size Torx T10. The screw size is identical for all four screws.

1024

Step 2

              Detaching the type plate               

• Loosen the nameplate on the underside and set it aside so that the right housing section can be removed in the next step.

Loosen the nameplate on the underside and set it aside so that the right housing section can be removed in the next step.

Step 3

              Open housing               

• The housing halves now lie loosely on top of each other. Remove the right housing half upwards and set aside.

The housing halves now lie loosely on top of each other. Remove the right housing half upwards and set aside.

Step 4

              Locate battery               

The green battery can be found in the red border.

The battery is labeled with: INR18650-13P SAMSUNG SDI 076

Step 5

              De-Soldering the battery               

• Heat the cables at both pole ends with a soldering iron and detach them.
• Please dispose of the battery properly at local disposal points.

Heat the cables at both pole ends with a soldering iron and detach them.

Please dispose of the battery properly at local disposal points.

Step 6

              Soldering of the new battery               

• Connect the side of the new battery with the white ring (positive pole +) to the red cable. Solder the blue cable to the other side (without white ring).

Connect the side of the new battery with the white ring (positive pole +) to the red cable. Solder the blue cable to the other side (without white ring).

To reassemble the device, follow the steps in reverse order

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             


        oldturkey03 is helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

oldturkey03

Author

                                      with 1 other contributor 

                    BenZ78                     

Member since: 10/15/2019

6,129 Reputation

                                      1 Guide authored                  



                       Badges:
                       31







                                                        +28 more badges                           

Team

                       iFanatics                        

                                                  Member of iFanatics 



                    Community                     


                                            49 Members                     


                                            102 Guides authored