Difficulty

Easy

Steps

8

Time Required

Suggest a time??

Sections

1

  • Bosch Maxx WFL2455 Washing-Machine Front panel disassembly
  • 8 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackBosch Maxx WFL2455

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Lower cover
  • Unplug your device.
  • Remove the cover hiding the drain hole.
  • Remove the T20 Torx screw which is holding the lower cover.
  • Remove the lower cover by sliding it to the right.

Unplug your device.

Remove the cover hiding the drain hole.

Remove the T20 Torx screw which is holding the lower cover.

Remove the lower cover by sliding it to the right.

1024

Step 2

              Detergent dispenser
  • Remove the detergent dispenser by opening it then by pressing on the notch with your finger.

Remove the detergent dispenser by opening it then by pressing on the notch with your finger.

Step 3

              Drum gasket ring
  • Remove the ring holding the drum gasket.
  • Start with the spring located near the window hinge.
  • Avoid using sharp or cutting tools to avoid damaging the gasket.

Remove the ring holding the drum gasket.

Start with the spring located near the window hinge.

Avoid using sharp or cutting tools to avoid damaging the gasket.

Step 4

              Drum gasket
  • Insérez ici votre traduction
  • Insérez ici votre traduction
  • Move the gasket to the inside of the drum so that it won’t bother when you’ll be removing the front panel.
  • Avoid using sharp or cutting tools to avoid damaging the gasket.

Insérez ici votre traduction

Move the gasket to the inside of the drum so that it won’t bother when you’ll be removing the front panel.

Step 5

              Front panel mounting screws
  • Remove the two T20 Torx screws located below the front panel.
  • Remove the T20 Torx screw located in the detergent dispenser slot.

Remove the two T20 Torx screws located below the front panel.

Remove the T20 Torx screw located in the detergent dispenser slot.

Step 6

              Removing the front panel
  • The front panel is held in place by a strip, held by the previously removed screw of the detergent dispenser slot.
  • To remove the front panel, start by sliding it downwards (it should normally fall under its own weight).
  • Insérez ici votre traduction
  • Insérez ici votre traduction
  • Insérez ici votre traduction

The front panel is held in place by a strip, held by the previously removed screw of the detergent dispenser slot.

To remove the front panel, start by sliding it downwards (it should normally fall under its own weight).

Step 7

              Front panel's connections
  • There’s an electrical connection between the body of the device and the front panel (probably a window sensor).
  • Disconnect the window sensor by lifting the connector’s tab and by pulling it down firmy.
  • On the second picture, the connector is shown partially disconnected.

There’s an electrical connection between the body of the device and the front panel (probably a window sensor).

Disconnect the window sensor by lifting the connector’s tab and by pulling it down firmy.

On the second picture, the connector is shown partially disconnected.

Step 8

              Wire guide
  • Remove the guide from the front panel.
  • And voila, the front panel is disassembled!

Remove the guide from the front panel.

And voila, the front panel is disassembled!

To reassemble your device, follow the above steps in reverse order.

Cancel: I did not complete this guide.

        Haitham is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Haitham

Author

                                      with 1 other contributor 


                    Haitham

Member since: 12/04/2009

147 Reputation

                                      2 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges