Bosch Mfq 36440 Disassembly Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          5 minutes            

Sections

1

• Bosch MFQ 36440 Disassembly
• 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackBosch ErgoMixx MFQ 36440

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Remove screws               

• Remove 2x Torx screws (size 10) on the front

Remove 2x Torx screws (size 10) on the front

1024

Step 2

              Remove the grey front cover               

• Remove the front cover
• Gently push downwards the cover, then pull it through the holes
• Once it is detached at the top, slide the entire gray cover down

Remove the front cover

Gently push downwards the cover, then pull it through the holes

Once it is detached at the top, slide the entire gray cover down

Step 3

              Detach the two sides of the mixer's white case               

• The first step is somewhat tricky. Use a long screwdriver to release the first part at the top.
• Continue your way all around the case.
• The clip on top front is tricky a long and thin flat screwdriver is needed
• The clip on very top is impossible to release you need to pry the two half’s carefully apart until the top releases

The first step is somewhat tricky. Use a long screwdriver to release the first part at the top.

Continue your way all around the case.

The clip on top front is tricky a long and thin flat screwdriver is needed

The clip on very top is impossible to release you need to pry the two half’s carefully apart until the top releases

Step 4

              Assembly               

• Prop everything back into the half without the clips
• Take care about the safety cam to be aligned in the cover

Prop everything back into the half without the clips

Take care about the safety cam to be aligned in the cover

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Stanky                     

Member since: 07/08/2017

957 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Carsten Hagemann - Jul 24, 2019

Reply

Hey, so what does “Continue your way all around the case” mean? I got the one clip open which you pictured, and then I got the case open just a tiny bit more, but now I’m stuck.

Could someone perhaps detail the last steps more? :(

Tobias Vdb - Dec 19, 2021

Reply

When you put it together again use the side with the cable “channels”, it is way easier than with the other side.