Difficulty

Moderate

Steps

5

Time Required

                          10 - 15 minutes

Sections

1

  • Circuit Board
  • 5 steps

Flags

0

  • BackBose Cinemate 10

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Circuit Board
  • Locate the cable input port, on the back of the device.
  • Remove the 2, PH1, 15mm screws.

Locate the cable input port, on the back of the device.

Remove the 2, PH1, 15mm screws.

1024

Step 2

  • Gently, pull the base of the A/V cable directly outward, away from the main body of the device.
  • Slide the plastic cover to the right, which should free the cover from the main body of the device.

Gently, pull the base of the A/V cable directly outward, away from the main body of the device.

Slide the plastic cover to the right, which should free the cover from the main body of the device.

Step 3

  • Using your fingers, gently pull outward on the multi-colored wire bundle until the black plastic wire harness is visible.
  • Press on the latch on the black plastic wire harness, and pull the multi-colored wire bundle simultaneously. The cables should now be detached from the harness.

Using your fingers, gently pull outward on the multi-colored wire bundle until the black plastic wire harness is visible.

Press on the latch on the black plastic wire harness, and pull the multi-colored wire bundle simultaneously. The cables should now be detached from the harness.

Step 4

  • Using your fingers, grasp the edges of cable input port.
  • Gently pull the cable input port away from main body of device. The Circuit Board should now be completely separated from the main body of the device.

Using your fingers, grasp the edges of cable input port.

Gently pull the cable input port away from main body of device. The Circuit Board should now be completely separated from the main body of the device.

Step 5

  • Press the tab on side of white plastic cable harness, and pull gently on the multi-colored wire bundle simultaneously. The cable should completely detach from the Circuit Board.

Press the tab on side of white plastic cable harness, and pull gently on the multi-colored wire bundle simultaneously. The cable should completely detach from the Circuit Board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors 


                    Phillip Halverson

Member since: 09/26/2018

335 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Eastern Washington University, Team S1-G4, Carnegie Fall 2018                        

                                                  Member of Eastern Washington University, Team S1-G4, Carnegie Fall 2018 



                    EWU-CARNEGIE-F18S1G4                     


                                            4 Members                     


                                            4 Guides authored

frankiemo239 - Sep 23, 2019

Reply

Where do I buy the circuit board from.

Where do I find the circuit board from

jeanne768 - Jun 22, 2020

Reply

Where can I buy a circuit board?