Difficulty
Difficult
Steps
7
Time Required
30 minutes
Sections
1
- Motherboard
- 7 steps
Flags
0
BackBose QuietComfort 25
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Begin repair by removing the ear cushion.
- The cushion is held on by a few small plastic clips. Pry carefully with plastic opening tool or fingernails.
Begin repair by removing the ear cushion.
The cushion is held on by a few small plastic clips. Pry carefully with plastic opening tool or fingernails.
1024
Step 2
- Next, remove the soft lining behind the cushion. This is held on with adhesive and is easily removed by hand.
Next, remove the soft lining behind the cushion. This is held on with adhesive and is easily removed by hand.
Step 3
- Once the soft lining is removed from behind the ear cushion, two screws will be exposed.
- Carefully remove the two 5 mm screws with a precision screwdriver (PH00) and put aside.
Once the soft lining is removed from behind the ear cushion, two screws will be exposed.
Carefully remove the two 5 mm screws with a precision screwdriver (PH00) and put aside.
Step 4
- Flip the earphones back over and carefully pry around the outside cover of the earpiece.
- Try a plastic opening tool before moving on to harder metal tools.
- This cover will come loose with moderate pressure.
Flip the earphones back over and carefully pry around the outside cover of the earpiece.
Try a plastic opening tool before moving on to harder metal tools.
This cover will come loose with moderate pressure.
Step 5
- There are 3 screws holding the motherboard to the earpiece.
- Remove these screws to make the next step easier.
There are 3 screws holding the motherboard to the earpiece.
Remove these screws to make the next step easier.
Step 6
- Once the motherboard is exposed, all of the soldered connection will need to be removed.
- Be careful of this step and take note of the position of each wire.
- This should only be attempted by someone with experience soldering small components, as irreparable damage may be result from improper methods. For help with this step see this guide on How To Solder and Desolder Connections
Once the motherboard is exposed, all of the soldered connection will need to be removed.
Be careful of this step and take note of the position of each wire.
This should only be attempted by someone with experience soldering small components, as irreparable damage may be result from improper methods. For help with this step see this guide on How To Solder and Desolder Connections
Step 7
- After removing all the soldered joints, the motherboard can be removed by hand.
- The connections will all need to be re-soldered into their respective locations.
After removing all the soldered joints, the motherboard can be removed by hand.
The connections will all need to be re-soldered into their respective locations.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 2 other contributors
Samuel Coss
Member since: 03/26/2018
339 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
IUPUI, Team S2-G3, Harley Spring 2018
Member of IUPUI, Team S2-G3, Harley Spring 2018
IUPUI-HARLEY-S18S2G3
3 Members
4 Guides authored
