Bose Sounddock Portable V2 Remote Battery Replacement Repair Guide

Difficulty

Very easy

Steps

2

Time Required

                          1 minute            

Sections

1

• Remote Battery
• 2 steps

Flags

0

• BackBose SoundDock Portable v2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remote Battery               

• Using a quarter, turn the battery cover 1/8th of a turn counterclockwise.

Using a quarter, turn the battery cover 1/8th of a turn counterclockwise.

1024

Step 2

• Remove cover and battery. The new battery should be placed with the positive (flat) side facing up.
• The correct battery for your remote is a CR2032. You may also use a DL2032.

Remove cover and battery. The new battery should be placed with the positive (flat) side facing up.

The correct battery for your remote is a CR2032. You may also use a DL2032.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Brodie Sutherland                     

Member since: 04/14/2015

279 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team 4-1, Maness Spring 2015                        

                                                  Member of Cal Poly, Team 4-1, Maness Spring 2015 



                    CPSU-MANESS-S15S4G1                     


                                            4 Members                     


                                            5 Guides authored                     

asbirdiesingh - Dec 25, 2016

Reply

We have a Bose Wave radio w/remote. This remote is not the one shown here with a screw for the battery compartment. It’s the type w/a sliding holder for the battery on the south end (bottom of the battery). Someone went to replace the battery and shoved the holder in upside down I believe. Consequently the holder will not come out all the way.

There must be a way to get it out without forcing it. There’s a pinch clip you have to either squeeze or move to the left to disengage it from the locked position and free it up. Any ideas as to how to accomplish this? We appreciate a reply back so this would make our Christmas better.

Merry Christmas & Happy Holidays! Cheers!