Difficulty

Moderate

Steps

3

Time Required

                          10 minutes

Sections

1

  • Outer Casing
  • 3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackBose SoundLink Color

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Outer Casing
  • Four round, plastic plugs are located on the back of the device.
  • Using a metal spudger, carefully pry up the plastic covers.
  • The covers are all glued on, so be careful not to scar the casing when prying them off. If possible, use a spudger or plastic opening tool to remove them.

Four round, plastic plugs are located on the back of the device.

Using a metal spudger, carefully pry up the plastic covers.

The covers are all glued on, so be careful not to scar the casing when prying them off. If possible, use a spudger or plastic opening tool to remove them.

1024

Step 2

  • Remove the four 1.8 cm-long T15 Torx Security screws from the outer case. Some of these use T15 “Star” 5-point Torx security screws.

Remove the four 1.8 cm-long T15 Torx Security screws from the outer case. Some of these use T15 “Star” 5-point Torx security screws.

Step 3

  • Carefully open up the casing.
  • The top button pad may need to be re-glued upon installing the new casing.

Carefully open up the casing.

The top button pad may need to be re-glued upon installing the new casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      13 other people completed this guide.

Author

                                      with 5 other contributors 


                    Michael Thorn

Member since: 03/31/2016

542 Reputation

                                      3 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Eastern Washington University, Team 1-4, Giguere Spring 2016                        

                                                  Member of Eastern Washington University, Team 1-4, Giguere Spring 2016 



                    EWU-GIGUERE-S16S1G4                     


                                            5 Members                     


                                            14 Guides authored

jwm82 - Aug 3, 2016

Reply

kestis155 - Nov 8, 2016

Hey, did you find out what size screwdriver you need?

art - Dec 16, 2016

yes its the number 5 torque

idixon16 - Aug 14, 2016

Reply

dose anyone know where to buy the outer casing for these? i need a mint colored one.

Joseph - Oct 31, 2016

Reply

I need more information on the Torx Plus bit can you provide the exact size as you used. The 1.8cm is not easy to search for. Brand and exact size number would help.