Difficulty
Easy
Steps
2
Time Required
1 minute
Sections
1
- Bose Soundlink II Cover Removal
- 2 steps
Flags
0
BackBose Soundlink II
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The outer cover is the outer nylon casing of the speaker that protects the inner components from damage. Removing it is necessary to replace the button cover, side cover, or speaker of the device.
Be sure to be watch out for sharp edges on any broken areas of the cover while removing.
Before beginning, make sure all power to the device is turned off and disconnected from any external power source.
What you need
Step 1
Bose Soundlink II Cover Removal
- Using a 2.5 mm hex wrench, remove the two 13 mm screws from the bottom of the speaker.
Using a 2.5 mm hex wrench, remove the two 13 mm screws from the bottom of the speaker.
1024
Step 2
- Push up on the back of the cover until it slides up slightly.
- Pull the cover up and away from the speaker backing.
Push up on the back of the cover until it slides up slightly.
Pull the cover up and away from the speaker backing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 9 other contributors
Kevin Bailey
Member since: 09/24/2015
440 Reputation
2 Guides authored
Badges:
14
+11 more badges
Team
Texas Tech, Team 22-4, Rauch Fall 2015
Member of Texas Tech, Team 22-4, Rauch Fall 2015
TTU-RAUCH-F15S22G4
3 Members
2 Guides authored