Difficulty
Moderate
Steps
10
Time Required
Suggest a time??
Sections
3
- Front Panel
- 3 steps
- Back panel
- 5 steps
- Bass Port
- 2 steps
Flags
1
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackBose SoundTouch 10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The motherboard in this guide contains capacitors which can hold a charge even when the speaker is powered off. Do not touch the as it may result in a shock.
What you need
Step 1
Front Panel
- Turn the speaker over so that the rubber strips along the bottom are facing you.
- Use the iFixit Opening Tool to peel back the rubber strip on the bottom-front edge.
Turn the speaker over so that the rubber strips along the bottom are facing you.
Use the iFixit Opening Tool to peel back the rubber strip on the bottom-front edge.
1024
Step 2
- Use a #2 Phillips screwdriver to remove each of the three 20mm screws on the bottom front edge of the speaker.
Use a #2 Phillips screwdriver to remove each of the three 20mm screws on the bottom front edge of the speaker.
Step 3
- Slide the front panel with the mesh covering downwards to disconnect it from the SoundTouch 10 body.
- Lift the panel away to reveal the speaker head.
Slide the front panel with the mesh covering downwards to disconnect it from the SoundTouch 10 body.
Lift the panel away to reveal the speaker head.
Step 4
Back panel
- Use a #2 Phillips screwdriver to remove each of the six 20mm screws located underneath the front panel.
Use a #2 Phillips screwdriver to remove each of the six 20mm screws located underneath the front panel.
Step 5
- Flip the speaker onto its back.
- Loosen the adhesive by sliding a Metal Spudger under the edge where the back panel meets the speaker’s body.
Flip the speaker onto its back.
Loosen the adhesive by sliding a Metal Spudger under the edge where the back panel meets the speaker’s body.
Step 6
- Use force with an iFixit Plastic Opening Tool to pry the back panel up from the speaker frame.
- If the panel does not come free easily, a heat gun may be needed to weaken the adhesive.
- Once the panel has been disconnected, it should fall open revealing the motherboard.
Use force with an iFixit Plastic Opening Tool to pry the back panel up from the speaker frame.
If the panel does not come free easily, a heat gun may be needed to weaken the adhesive.
Once the panel has been disconnected, it should fall open revealing the motherboard.
Step 7
- Use ESD Safe Tweezers (Blunt Nose) to pull out the wire ribbon at the end of the motherboard.
Use ESD Safe Tweezers (Blunt Nose) to pull out the wire ribbon at the end of the motherboard.
Step 8
- The motherboard contains capacitors (shown as cylinders in the upper right of the picture) which can hold a charge even when the speaker is powered off. Do not touch them as doing so may result in a shock.
- Pull up on the base of the speaker wire plug to disconnect it from the motherboard.
The motherboard contains capacitors (shown as cylinders in the upper right of the picture) which can hold a charge even when the speaker is powered off. Do not touch them as doing so may result in a shock.
Pull up on the base of the speaker wire plug to disconnect it from the motherboard.
Step 9
Bass Port
- Use a #0 Phillips screwdriver to remove each of the two 11mm screws attached to the bass port.
Use a #0 Phillips screwdriver to remove each of the two 11mm screws attached to the bass port.
Step 10
- Lift the bass port away from the motherboard.
Lift the bass port away from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
James Asbury
Member since: 04/10/2017
886 Reputation
5 Guides authored
Badges:
16
+13 more badges
Team
Cal Poly, Team S13-G1, Forte Spring 2017
Member of Cal Poly, Team S13-G1, Forte Spring 2017
CPSU-FORTE-S17S13G1
4 Members
5 Guides authored
