Bose Soundtouch 30 Display Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          10 minutes            

Sections

2

• Base Plate
• 1 step
• Display Assembly
• 3 steps

Flags

0

• BackBOSE SoundTouch 30

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Base Plate               

• Remove the four 15.5 mm PH2 screws securing the base plate to the device.

Remove the four 15.5 mm PH2 screws securing the base plate to the device.

1024

Step 2

              Display Assembly               

• Remove the three 15.5mm PH2 screws holding the front-mesh grille in place.

Remove the three 15.5mm PH2 screws holding the front-mesh grille in place.

Step 3

• Remove the grille by gripping the edges and pulling upwards.
• There is a small ribbon cable that connects the display assembly to the body of the device. Make sure to disconnect the cable before pulling the grille all the way off or else the cable could snap.

Remove the grille by gripping the edges and pulling upwards.

There is a small ribbon cable that connects the display assembly to the body of the device. Make sure to disconnect the cable before pulling the grille all the way off or else the cable could snap.

Step 4

• Remove the six 8.9mm T9 torx screws holding the display assembly down.
• The display assembly can now be lifted out of the grille so that a new one can be put in.

Remove the six 8.9mm T9 torx screws holding the display assembly down.

The display assembly can now be lifted out of the grille so that a new one can be put in.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Brennen Irey                     

Member since: 04/18/2018

993 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       Cal Poly, Team S16-G2, Livingston Spring 2018                        

                                                  Member of Cal Poly, Team S16-G2, Livingston Spring 2018 



                    CPSU-LIVINGSTON-S18S16G2                     


                                            4 Members                     


                                            6 Guides authored                     

imrankhannnnn786 - Jan 4, 2023

Reply

Display assembly price