Difficulty

Moderate

Steps

5

Time Required

                          10 minutes

Sections

2

  • Base Plate
  • 1 step
  • Power Supply
  • 4 steps

Flags

0

  • BackBOSE SoundTouch 30

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Base Plate
  • Remove the four 15.5 mm PH2 screws securing the base plate to the device.

Remove the four 15.5 mm PH2 screws securing the base plate to the device.

1024

Step 2

              Power Supply
  • Remove the six 15.5mm PH2 screws securing the grille and rear panel to the device.

Remove the six 15.5mm PH2 screws securing the grille and rear panel to the device.

Step 3

  • Remove the grille and rear panel by grabbing the corners and pulling upwards and outwards.
  • There is a small ribbon cable that connects the display assembly to the body of the device. Make sure to disconnect the cable before pulling the grille all the way off or else the cable could snap.

Remove the grille and rear panel by grabbing the corners and pulling upwards and outwards.

There is a small ribbon cable that connects the display assembly to the body of the device. Make sure to disconnect the cable before pulling the grille all the way off or else the cable could snap.

Step 4

  • Remove all four 15.5 mm PH2 screws holding the power supply down.
  • The power supply is identified by a green board with a large metal covering.

Remove all four 15.5 mm PH2 screws holding the power supply down.

The power supply is identified by a green board with a large metal covering.

Step 5

  • Disconnect the three cables from the power supply by squeezing the white tabs if present and gently pulling.
  • Pick up the power supply and remove the fourth cable from the underside of the power supply.
  • Remove the power supply.

Disconnect the three cables from the power supply by squeezing the white tabs if present and gently pulling.

Pick up the power supply and remove the fourth cable from the underside of the power supply.

Remove the power supply.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 2 other contributors 


                    Brennen Irey

Member since: 04/18/2018

993 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team S16-G2, Livingston Spring 2018                        

                                                  Member of Cal Poly, Team S16-G2, Livingston Spring 2018 



                    CPSU-LIVINGSTON-S18S16G2                     


                                            4 Members                     


                                            6 Guides authored

Hitesh Gohill - Oct 9, 2018

Reply

where can we buy the [power supply unit, as i have messed mine by using 220v instead of 110v

Tomás Rosales - Oct 12, 2018

Hello. Do you want to exchange power supplies?

Contact me please!

Josley Oliveira - Dec 13, 2019

Hi. My name Josley from Brazil.

I need you Power supply module for bose soundtouch 30.

You can help me?

Isidro - Apr 10, 2020

Hola donde puedo comprar el modulo SoundTouch 30 Power Supply.

Muchas gracias.

Tomás Rosales - Oct 12, 2018

Reply

I have the opposite problem. Bought the 110v instead of the 220v and now I have to use a step down transformer. Wanna exchange power supplies?

tomas@familiarosales.cl