Bose Soundtouch Portable Subwoofer Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          35 minutes

Sections

Speaker Battery
3 steps
Grille
3 steps
Metal Trim
2 steps
Subwoofer
3 steps

Flags

BackBose SoundTouch Portable
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Speaker Battery

Remove the two T-10 machine screws at the bottom of the device.

Remove the two T-10 machine screws at the bottom of the device.

1024

Step 2

Turn the device around.
From the top, lightly push down the back cover to release it.
Lift the bottom of the cover and pull it up.

Turn the device around.

From the top, lightly push down the back cover to release it.

Lift the bottom of the cover and pull it up.

Step 3

Remove the two T-10 machine screws, then pull the battery straight out.

Remove the two T-10 machine screws, then pull the battery straight out.

Step 4

              Grille

Remove the two screws holding the speaker grille in place.

Remove the two screws holding the speaker grille in place.

Step 5

Grip the sides of the device and push the speaker grille down and out.

Grip the sides of the device and push the speaker grille down and out.

Step 6

Gently release the ribbon from its connector and remove the grille.

Gently release the ribbon from its connector and remove the grille.

Step 7

              Metal Trim

Remove the two screws using a torx screwdriver.

Remove the two screws using a torx screwdriver.

Step 8

With the bottom of the device facing you, pull down the trim pieces to remove from the device body.

With the bottom of the device facing you, pull down the trim pieces to remove from the device body.

Step 9

              Subwoofer

Separate the case that holds the subwoofer in place.
Be careful when doing this step because there are several connectors inside.

Separate the case that holds the subwoofer in place.

Be careful when doing this step because there are several connectors inside.

Step 10

Gently pull on the connectors at the circuit board to remove. Remove the screws from the circuit board and set the board aside.

Gently pull on the connectors at the circuit board to remove. Remove the screws from the circuit board and set the board aside.

Step 11

Remove the four screws from the subwoofer and lift it out of the casing.

Remove the four screws from the subwoofer and lift it out of the casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Chelsea Martin

Member since: 02/20/2017

688 Reputation

                                      6 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team S1-G3, Leahy Spring 2017                        

                                                  Member of USF Tampa, Team S1-G3, Leahy Spring 2017 



                    USFT-LEAHY-S17S1G3                     


                                            3 Members                     


                                            9 Guides authored

Outdoor Sumo - Apr 26, 2020

Thanks a lot for sharing your incredible ideas. It is an appreciated and pretty tip for all those music lovers. What a Fatal post for those who want to upgrade an existing subwoofer with a new one.

About more: www.outdoorsumo.com

Outdoor Sumo - Jun 12, 2020

Thanks a lot for sharing your incredible ideas. It is an appreciated and pretty tip for all those music lovers.

About more: ++https://compactcarsubwoofer.blogspot.com…

What you need#

Team#

What you need

Team