Difficulty
Moderate
Steps
3
Time Required
3 minutes
Sections
1
- Front Grill
- 3 steps
Flags
0
BackBose Wave Radio AWR1-1W
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Grill
- Wedge the spudger between the top and front panel on the right side of the device.
- Push down on the spudger, lifting the front panel away from the top panel until it pops out of the right side.
- Repeat for the left side of the device.
- Too much pressure may break the panel, but it should flex slightly before it pops out.
Wedge the spudger between the top and front panel on the right side of the device.
Push down on the spudger, lifting the front panel away from the top panel until it pops out of the right side.
Repeat for the left side of the device.
Too much pressure may break the panel, but it should flex slightly before it pops out.
1024
Step 2
- Once the panel is released on the left side, wedge the spudger between the top panel and front grill of the device as shown.
- Apply pressure and move the spudger upward until the front grill pops out.
- Repeat for the right side of the device.
Once the panel is released on the left side, wedge the spudger between the top panel and front grill of the device as shown.
Apply pressure and move the spudger upward until the front grill pops out.
Repeat for the right side of the device.
Step 3
- Lift the front grill away from the device.
Lift the front grill away from the device.
To reattach the front panel, press it into the front of the device until it pops back into place.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Cassie Harriman
Member since: 04/18/2017
1,015 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
Cal Poly, Team S15-G2, Banghart Spring 2017
Member of Cal Poly, Team S15-G2, Banghart Spring 2017
CPSU-BANGHART-S17S15G2
4 Members
6 Guides authored