Braun Aromaster Kf440 Internal Tubing Replacement Guide Repair Guide

Difficulty

Moderate

Steps

12

Time Required

                          10 - 15 minutes            

Sections

2

• Base
• 3 steps
• Internal Tubing
• 9 steps

Flags

0

• BackBraun Aromaster KF440

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Access the base               

• Remove the carafe (coffee pot) from the coffee maker.
• Turn the Braun Aromaster KF 440 upside down so the base is exposed.

Remove the carafe (coffee pot) from the coffee maker.

Turn the Braun Aromaster KF 440 upside down so the base is exposed.

1024

Step 2

              Remove the nut               

• Locate the nut at the center of the base and unscrew it with a pair of basic pliers.

Locate the nut at the center of the base and unscrew it with a pair of basic pliers.

Step 3

              Remove the cover               

• Gently lift the cover away from the bottom of the coffee maker and remove it.

Gently lift the cover away from the bottom of the coffee maker and remove it.

Step 4

              Remove first tubing from one-way valve               

• Using the larger plastic opening tool, gently push the tubing off of the one-way valve located in the center. (If the tubing is being stubborn and won’t come off, run the metal spudger around the inside of tubing to free it up.)
• The piece will remain attached to the center plate for now.

Using the larger plastic opening tool, gently push the tubing off of the one-way valve located in the center. (If the tubing is being stubborn and won’t come off, run the metal spudger around the inside of tubing to free it up.)

The piece will remain attached to the center plate for now.

Step 5

              Remove second tubing from hose               

• Using the larger plastic opening tool, gently push the tubing off of the valve located on the side. (If the tubing is being stubborn and won’t come off, run the Spudger tool around the inside of tubing to free it up.)

Using the larger plastic opening tool, gently push the tubing off of the valve located on the side. (If the tubing is being stubborn and won’t come off, run the Spudger tool around the inside of tubing to free it up.)

Step 6

              Remove tubing from center plate               

• Using the larger plastic opening tool, gently push the tubing off of the center plate. (If the tubing is being stubborn and won’t come off, run the metal spudger around the inside of tubing to free it up.)

Using the larger plastic opening tool, gently push the tubing off of the center plate. (If the tubing is being stubborn and won’t come off, run the metal spudger around the inside of tubing to free it up.)

Step 7

              Remove filter basket housing               

• Grab the filter basket housing firmly.
• Lift upwards on the filter basket housing. You may need to use one hand to hold the body of the coffee maker in place in order to remove the piece.

Grab the filter basket housing firmly.

Lift upwards on the filter basket housing. You may need to use one hand to hold the body of the coffee maker in place in order to remove the piece.

Step 8

              Locate latches               

• Locate the two plastic latches on the inside of the coffee maker.

Locate the two plastic latches on the inside of the coffee maker.

Step 9

              Remove the top               

• Wedge the plastic opening tool between the back of the coffee maker and its top.
• Once the top is loose remove by lifting up on the top of the coffee maker.

Wedge the plastic opening tool between the back of the coffee maker and its top.

Once the top is loose remove by lifting up on the top of the coffee maker.

Step 10

              Remove tube from the lid               

• Once the top is removed you will notice that there is a tube attached.
• Remove the tube from the lid by using the opening tool.
• Place the opening tool under the clasp and gently lift the plastic clasps.

Once the top is removed you will notice that there is a tube attached.

Remove the tube from the lid by using the opening tool.

Place the opening tool under the clasp and gently lift the plastic clasps.

Step 11

              Detach tube               

• Finally, firmly hold the tube. Wiggle the black component away from the tube by hand.

Finally, firmly hold the tube. Wiggle the black component away from the tube by hand.

Step 12

              Tubes are ready for replacement               

• You now have your tubes removed and ready to be replaced.

You now have your tubes removed and ready to be replaced.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Darcy Groom                     

Member since: 10/19/2014

340 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Baylor, Team 8-12, Williams Fall 2014                        

                                                  Member of Baylor, Team 8-12, Williams Fall 2014 



                    BU-WILLIAMS-F14S8G12                     


                                            3 Members                     


                                            10 Guides authored